Pics Request For Cowl Hoods
 

Getting ready to buy a induction scoop to put on my hood. Not sure what height I want it to be.

If anyone has a cowl induction hood between 2 inches tall and 6 inches tall or taller, please post your pictures and please state how tall it is.

Thanks all.

PS: The truck I am building is going to be Pro-Street/Drag Race. The body is going to be built to have a very aggressive pro-street look to it. The chassis, suspension, and powertrain/engine is going to be built for racing.

This is going to be a custom one off build. When I start ordering parts and actually building the truck, I will comment on this thread to let you all know when I will start a build thread.

Anyways, pictures of your cowl hoods would be great. Thanks again and good day to all.

Re: Pics Request For Cowl Hoods
 

Here is mine.

Re: Pics Request For Cowl Hoods
 

here's mine it's 2"

Re: Pics Request For Cowl Hoods
 

Low&slow:
Member hillijob did a cowl hood from a standard hood a while back, if you want some ideas. It turned out nice!
http://67-72chevytrucks.com/vboard/s...hlight=Hilljob

Mike
Posted via Mobile Device

Re: Pics Request For Cowl Hoods
 

Here are come pics of when we pulled it off the trailer after paint last fall. Paint is HOK Lilac Pearl over black and the cowl is done with HOK marblizer over black. Cowl is a 2".

Re: Pics Request For Cowl Hoods
 

http://i228.photobucket.com/albums/e...town/image.jpg
Posted via Mobile Device
Posted via Mobile Device

Re: Pics Request For Cowl Hoods
 

With the shape of the dash these trucks will support a 4" cowl with out sacrificing the view.

Re: Pics Request For Cowl Hoods
 

Here is a steel goodmark, fits great.

Re: Pics Request For Cowl Hoods
 

Here are pictures of a 2" cowl hood on my '67 I got from LMC.

Re: Pics Request For Cowl Hoods
 

That's a sweet truck. If you don't mind me asking, What are the specs on that chop?


And thanks all for the pictures. All of your trucks look great. Seems like a lot of people go with a 2 inch more than any other sizes available. I've decided that a 2" isn't the look I'm going for. So I will be getting one a bit taller OR I may just make my own.

Re: Pics Request For Cowl Hoods
 

We did a 4" chop and 4" channel. I can get more detailed pictures if you're interested. Some of the other details are a fuel injected 283, T5 5 speed, trussed ford 9 inch. The step side bed should be going on in a couple of weeks.
Posted via Mobile Device

Re: Pics Request For Cowl Hoods
 

here you go

Re: Pics Request For Cowl Hoods
 

I'm defiantly interested in more detailed pictures. I plan on doing a chop in the near future as well and trying to figure out how much I want to cut out.



Also for everyone else, if you have pictures of any cowl hoods on these years of trucks with taller than a 2 inch cowl, please post some pictures.

Thanks and good day to all.

Re: Pics Request For Cowl Hoods
 

My wifes 72 has a Harwood fiberglass hood I think it is a 6" cowl but I could be wrong

Re: Pics Request For Cowl Hoods
 

i looked at everything you could buy, i didn't like any of them. so, i made this one. i put the factory ridge down the middle and onto the front of then hood like factory. i added 70 chevelle cowl induction emblems to the side. what i tried to do is make it so that it would looks like chevrolet did it.

Re: Pics Request For Cowl Hoods
 

xman - Can you some how confirm that is a 6 inch cowl? It looks more like a 2-2 1/2 inch. Good looking truck though.

50mercfan - That's a great looking cowl you got. Do you have any pics of how you made it?

Re: Pics Request For Cowl Hoods
 

Cool truck,I'm diggin the color.

Re: Pics Request For Cowl Hoods
 

low&slow
I measured the hood this weedend and my mistake it is a 4" fiberglass cowl hood as it is taller then the the 2" steel cowl hood on my 72 burb sorry didnt get any picks of me measuring it