The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   60-66 Suburbans (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=241)
-   -   sliders to trade 4 solid side glass (https://67-72chevytrucks.com/vboard/showthread.php?t=569907)

Big Rick 53 03-10-2013 04:33 AM

sliders to trade 4 solid side glass
 
Hi I'm new been lookin for a short time. I have a 66 sub it has a stock sbc/4speed with grannie.The steering has been changed to power and rebult new ball joints /tie rods/bushings and power disk brakes. I want to put in a700r o/d and change out rear end to a 307 rear for road tripen. Another thing I want to change is side glass I want solid glass. As I change things out I want trade or sell the parts I remove. I know I need to change out starter & ring gear. The springs and suspenion are all moog parts and new. Just receved a wire kit to install.Hope to do this a little at a time till it gets to rust in floor I want to drive it as much as I can Big Rick

GVDobler 03-10-2013 11:36 AM

Re: sliders to trade 4 solid side glass
 
Not sure exactly what you mean, but I would take the slider latches if they are available.

Big Rick 53 03-12-2013 11:48 PM

Re: sliders to trade 4 solid side glass
 
I checked all of my windos no latches. There is some other subs at a frends place I'll check out there later in the week. That is the reason I want solid glass. I'm thinking I may glue in glass in sides.

padresag 03-13-2013 12:50 AM

Re: sliders to trade 4 solid side glass
 
Quote:

Originally Posted by Big Rick 53 (Post 5943772)
I checked all of my windos no latches. There is some other subs at a frends place I'll check out there later in the week. That is the reason I want solid glass. I'm thinking I may glue in glass in sides.

you can get the rubber from steele's for the solid glass
ron

Big Rick 53 03-13-2013 03:14 AM

Re: sliders to trade 4 solid side glass
 
Thank you Your wood work is so cool the turnings are unreal the tables so neat


All times are GMT -4. The time now is 09:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com