The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   truck cover that fits cab...then bed (https://67-72chevytrucks.com/vboard/showthread.php?t=570090)

luvbowties 03-11-2013 06:05 AM

truck cover that fits cab...then bed
 
Anyone found a cover(to be used for inside storage)that fits down around the cab and then extends 'along the bed'? Most appear to taper from back/top of cab down to top of tailgate like a sliding board, creating a 'bunching up' of the excess. Trying to avoid taking the 'taper-type' to an upholstery shop if possible. *Short bed stepside preferred; short fleetside would be acceptable.
Thanks for any help.
Sam

chiefcfd 03-11-2013 07:53 AM

Re: truck cover that fits cab...then bed
 
There is a company I think California Custom Covers that will customize a cover. I had one on a 1963 GMC. They will customize the mirror pockets, antenna pocket and any other you need . You give them dimensions for anything you need for your specific vehicle.

midniteblues 03-11-2013 08:08 AM

Re: truck cover that fits cab...then bed
 
I have a california car/truck cover that i bought for the kids 67 sort fleet and it does what your asking the top of the bed is flat an it fits nicely around the cab.
It was actually for a later model truck but works great an for $20 nib at a swapp meet who could turn that down:metal:
I'm thinking with a stepside though it would be a lil' baggy in the rear

68Stepbed 03-12-2013 08:38 AM

Re: truck cover that fits cab...then bed
 
This is mine from California Car Cover Co. on my 68 stepside. www.calcarcover.com

http://i221.photobucket.com/albums/d...c/100_6195.jpg
http://i221.photobucket.com/albums/d...c/100_6192.jpg

midniteblues 03-12-2013 09:00 AM

Re: truck cover that fits cab...then bed
 
looks like the same one i have funny cause it looks like it fits tighter around the stepper than the fleet. mine came with mirror pocket allready on it and they are the only thing that didnt fit the mirrors on the newer trucks are located at the front coner of the door whereas the c10 mirrors are farther back on the doors.It dont matter to me it cover great and just has some floppy ears when its on.oh an it came with a extra set of mirror pockets to sew on I just never did it.

I have one for my 81 camaro also and that one was for the 94-? camaro but that fits even better on the 81 once again $20 nib swap meet find


All times are GMT -4. The time now is 01:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com