The 1947 - Present Chevrolet & GMC Truck Message Board Network - Do i have to weld in steering reinforcement plate

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Do i have to weld in steering reinforcement plate (https://67-72chevytrucks.com/vboard/showthread.php?t=571682)

tgfeller

03-20-2013 11:16 PM

Do i have to weld in steering reinforcement plate

1 Attachment(s)

I have a factory 4x4 steering box reinforcement plate that I'm going to be putting it. Can i just bolt it into the frame via the 6 bolts to the top and bottom of the rail and the 3 that go into the steering box?

I just por 15'd my frame and all, i'd rather not grind it off to weld it right now. thanks

JimKshortstep4x4

03-21-2013 08:25 AM

Re: Do i have to weld in steering reinforcement plate

If it were me, I would go ahead and weld it if you are into off roading.

Jim

kwmech

03-21-2013 01:52 PM

Re: Do i have to weld in steering reinforcement plate

I think you should pass on the install and sell it to me;)

tgfeller

03-21-2013 08:55 PM

Re: Do i have to weld in steering reinforcement plate

Lol, well I only want to do this once so I figure I'll weld it in like the factory with bolts!
Posted via Mobile Device

All times are GMT -4. The time now is 12:36 PM.