Opinions please...
 

Ok so i have still not pulled the trigger on my new wheels. I respect your guys opinions. For a 3.5/5 drop wat combo would you go with?


1. 18x8 front 18x9.5 rear

2. 18x8 front 20x10 rear


or another size combo?

Re: Opinions please...
 

20x8.5 and 20x10

Re: Opinions please...
 

Opinions?

Front 15x8, Rear 15x10, Steelies. If I were going bigger than 15's I would do 18's or 20's on all corners. No mixing. That's just me though. I was dead set on going with 20x8 and 20x10 on mine. Heck, the 20" tires are just as cheap, if not cheaper than most 15's. But I think when the time comes I am going steelies, at least for a little while. I know I'll end up buying some 20's but at least I can enjoy the truck while I save up the cash. Plus, who said you can't have 2 sets?

Danny

Re: Opinions please...
 

i was told this one time and i will never forget it, once you go low you are just gonna want to go lower do it right the first time 4-1/2 & 6 or 5 & 7 and yes 20's.

Re: Opinions please...
 

Already lowered it 3.5/5 but you may be right.:lol:

Re: Opinions please...
 

buy a 2" spring for the front and add a 1 block in the rear, sale the 1" springs and you will be happy, if you are already thinking 20's in the rear you are gonna wish you got them for the front :chevy:

Re: Opinions please...
 

what lolife said....:metal:

Re: Opinions please...
 

Another reason to cut your coils or clamp it down before buying moderate drop springs if at all
Posted via Mobile Device

Re: Opinions please...
 

20" wheels on all for corners and make the fronts 8.5" wide and backs 10" wide. They look a lot better than 18's and 20 in my opinion.;):chevy:

Re: Opinions please...
 

depends what you buy :ito:

Re: Opinions please...
 

20s .. 18s look good I just like 20s all the way around.
Posted via Mobile Device

Re: Opinions please...
 

I like a little more rubber on the rim (better ride and less likely to damage a rim in a blow out) but also like a little better handling and with a full size truck as compared to a 15" a good middle of the road is 18" all the way around. I went 17x8" cragars but a good looking 17" is hard to find.

Re: Opinions please...
 

I am running 18/20's and kind of mixed on it. Blazer came that way. Would probably run all 18's so it could have a bit more tire in the back.

Re: Opinions please...
 

What he said!!!

Re: Opinions please...
 

So with a 3.5/5 drop those will not rub?

Re: Opinions please...
 

Run a 40 or 45 series tire and you will be fine.
(I prefer 40 series)

Re: Opinions please...
 

Leave it stock!!!! Original is worth way more!

When all that customizing wears out and is no longer in style...it won't be worth nearly what you put into it...JMHO..

:)
Posted via Mobile Device

Re: Opinions please...
 

Go with 20's all the way around. This look will never leave the hotrod and show car circuit.

Re: Opinions please...
 

Yeah....either did spinner rims...lol
Posted via Mobile Device

Re: Opinions please...
 

Spinner rims....lol Oh my, I tried to forget about that fad....knew that wouldnt last long. Remember a story about one where the bearings burned out and got hot enough to come off while driving. I actually know a whells shop that has a couple sets around.

Re: Opinions please...
 

Thats why you save the parts and dont cut into the frame
Posted via Mobile Device

Re: Opinions please...
 

One in every crowd. :lol:
Posted via Mobile Device

Re: Opinions please...
 

Yes sir i can put my truck back to stock if i wanted but i think my parts and rims may rust before i decide to do that :lol:
Posted via Mobile Device

Re: Opinions please...
 

Wasnt what I meant but to avoid beating a dead horse I will refrain from further comment.
Posted via Mobile Device

Re: Opinions please...
 

Hey... the cat asked for "opinions", all are welcomed no?

But I will refrain from my opinions on the "big wheels on old rigs" debate. ;)

Gary