The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   TN 292 Engine 40k (https://67-72chevytrucks.com/vboard/showthread.php?t=573686)

BarryB 04-01-2013 09:13 PM

292 Engine 40k
 
I've got a 292 straight 6 from my 72 c30. It is a jasper rebuilt engine, it has about 40,000 on it now. I'm going to leave it in truck until it sells, so you can here it run. I'll start out asking 500.00 or best offer for it. electronic dist already. It's dark now But I'll get pics of it hopefully tomorrow. only reply in this thread, No PM's please. No shipping unless you want to make all the arrangements.

Leroy-B1 04-02-2013 07:01 AM

Re: 292 Engine 40k
 
I may be interested in it would like to see pics and I'm close enough to come get
Posted via Mobile Device

BarryB 04-02-2013 06:05 PM

Re: 292 Engine 40k
 
3 Attachment(s)
Quote:

Originally Posted by Leroy-B1 (Post 5986467)
I may be interested in it would like to see pics and I'm close enough to come get
Posted via Mobile Device

You ask and you shall receive. I'm also leaving all the road dust and just dirty because it is a used motor, just not used that much. :)

Leroy-B1 04-02-2013 06:23 PM

Re: 292 Engine 40k
 
Does manifold and exhaust unbolt on this one? Have set of borla headers and off intake or inline so want to make sure they will work
Posted via Mobile Device

BarryB 04-02-2013 07:27 PM

Re: 292 Engine 40k
 
Quote:

Originally Posted by Leroy-B1 (Post 5987587)
Does manifold and exhaust unbolt on this one? Have set of borla headers and off intake or inline so want to make sure they will work
Posted via Mobile Device

I'll have to go look. I'll try to get a better picture of the intake and exhaust manifolds.

BarryB 04-02-2013 07:30 PM

Re: 292 Engine 40k
 
2 Attachment(s)
Yes the manifolds unbolt from the head. Its kinda difficult to get good pictures while in the truck :)

BarryB 04-03-2013 05:08 PM

Re: 292 Engine 40k
 
btt

BarryB 04-05-2013 09:41 PM

Re: 292 Engine 40k
 
I never heard any more from Leroy, So BTT. I figured I'd have more interest than I haven't had so far. I pulling it out to install a small block, So I will let all the 6 cylinder go with it. Motor mounts, even the exhaust pipe.
Asking for serious offers.

unclesalty 04-05-2013 11:18 PM

Re: 292 Engine 40k
 
Hey there! say, by motor mounts, are you speaking of the frame towers, or just the rubber biscuits that bolt to the block? Or both? I may be able to make this work, I would be heading the other way, replacing a sbc with a six, (while I rebuild the 350). what all would you be keeping that would need to be replaced, I have a new radiator-pretty sure I could make it work- the fan shroud Im not so sure about. (Like the fuel pump, starter motor, etc) Is she set up for power steering? Cant tell in the photos.

BarryB 04-06-2013 09:07 AM

Re: 292 Engine 40k
 
Quote:

Originally Posted by unclesalty (Post 5993850)
Hey there! say, by motor mounts, are you speaking of the frame towers, or just the rubber biscuits that bolt to the block? Or both? I may be able to make this work, I would be heading the other way, replacing a sbc with a six, (while I rebuild the 350). what all would you be keeping that would need to be replaced, I have a new radiator-pretty sure I could make it work- the fan shroud Im not so sure about. (Like the fuel pump, starter motor, etc) Is she set up for power steering? Cant tell in the photos.

No she doesn't have power steering. But if a person like your self need the towers. Then yes I would let them go. you'll get everything starter, exhaust, towers and rubber mounts.

Leroy-B1 04-06-2013 09:40 PM

Re: 292 Engine 40k
 
Barry is there anyway you could pm me your number would like to talk to you about it sorry was a little to busy to respond last couple of days
Posted via Mobile Device

BarryB 04-07-2013 09:38 AM

Re: 292 Engine 40k
 
Quote:

Originally Posted by Leroy-B1 (Post 5995253)
Barry is there anyway you could pm me your number would like to talk to you about it sorry was a little to busy to respond last couple of days
Posted via Mobile Device

PM sent.

BarryB 04-11-2013 07:20 PM

Re: 292 Engine 40k
 
GONE! traded it for a 454.


All times are GMT -4. The time now is 11:57 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com