dana 44 front spindel
 

in good cond. its the big bearing one. take 30 shipped for it

http://i243.photobucket.com/albums/f...7/DSC_0017.jpg

Re: dana 44 front spindel
 

also have spindel nuts also

Re: dana 44 front spindel
 

Could you give me the part# so I can see if it is what my truck has? In '72 there was a 1st and second design and mine is 1st,same as '71.

Re: dana 44 front spindel
 

I will get part number this afternoon. I ve only known them to be big bearing and the small bearing. The small bearing ones are harder to find.

Re: dana 44 front spindel
 

I'm only familiar with 71/71 K/20 hub assemblies. Of the few 1/2 tons I've had I've never had to do repairs in this area and not sure about drum axles,either. For all I know there are only two designs for all,but want to be sure. I have a parts book to check application with using part#.

Re: dana 44 front spindel
 

I am interested if Tim passes and the grooves aren't bad where the seal was riding. It looks like it may be grooved?

Re: dana 44 front spindel
 

Its in good shape just dirty. Had both of them. But sold one. Couldn't find a number on it. All I know its the big bearing spindel for Dana 44 disc brake front

Re: dana 44 front spindel
 

Do you know what it came off of,then? Because there was the 71-72 1st design and the 72 2nd design. I don't have one to measure to compare and don't want to keep going around with this,so I'll just take it. PM your info for a postal m.o.....Thankx

Re: dana 44 front spindel
 

it come off a a 76 chevy 4 wheel drive. i thought it would work on 71-72. guess i ll move it to the 73-87 section.