1966 parts
 

Up for sale/trade :

6 lug later model rally wheels; 15 x 8 back and 15 x 6 front; need blasted/sanded and painted/powder coated, but in exc shape; no dents or rust; no tires - will be removed $100 OBO

Stock 6 lug rear; just pulled from truck, complete hub to hub; no leaks; brakes n e brakes work; $100 OBO

Front Fleetside Bed header panel; NO rot, surface rust; someone drilled out rivets along top edge, can be re-riveted or bolted up $50 OBO


Do not want to deal with shipping any of this, but willing to meet you within a reasonable distance for NO charge....

I am in need of a trailing arm in decent shape, let me know if you have.

thanks for looking,

Wagz

Re: 1966 parts
 

6 lug wheels $75 15x8 rear 15x6 front
rear $50

front bed panel $40

71 Chevy rally wheels w/ hubcaps $100

hit me up with offers, want to get rid of all of it, more stuff to come; lots of small stuff...

thanks, Wagz

Re: 1966 parts
 

FRONT BED PANEL SOLD!!!!!!!!!!!!!!!!!!!!



as promised; more parts, smalls will be shipped if requested: of course will combine parts in single package; First to contact through this thread will be first served;

All prices negotionable, the more you buy, the better the deal; if you request shipping, will give you and estimated flat rate.

enjoy and let me know if you have any ?s/etc

thanks as always, WAGZ

Bolt on adapters - from GM 5 x 5 on hub to 5 x 4.75 = $100

Original Back up lights - bezels pitted-glass good-housing good-original pigtails good = $50

Battery box - no rot, some surface; solid = $40

Low Profile bump stops - brand new/ extra set = $7

check out pictures, more to come....

Re: 1966 parts
 

More parts...............

Clear taillight lenses - new in box w/ bowtie = $25

Front turn signal housings - good cond - 1 clear lens has crack @ bottom = $25

Aluminum turn signal bezels - need cleaned, good cond = $10 a pair

GMC headlight bezels - steel, good condition - ready for paint = $35

Stock 1971 C10 motor mounts (not sure if v8 or inline 6) = $25

red taillight lenses - bowtie, crack on bottom of 1 = $7

Re: 1966 parts
 

couple more..........

top radiator mount - no rubber = $15

Trac Bar Urethane bushings - new in box = $15


more will be coming, let me know if you want anything.

thanks for looking, trying to make some bux to finish up my 66 build (look for it in build thread).

Wagz

Re: 1966 parts
 

15" Nash hubcaps - driver quality - need cleaned up - i know, not 66 parts but I had them on my 66;

$50 OBO


thanks again for looking,

WAGZ

Re: 1966 parts
 

How thick is the rubber on the bumpstops?

Re: 1966 parts
 

Interested in the 15x8 .. 6 lug wheels ... Shipping to 97080 Thanks !!!

Re: 1966 parts
 

MP33, bumpstops are 3/4" from flat to tip of dome.


Would rather not ship the wheels anywhere or split the "set" up... think it goes about $25 a wheel to ship them.

thanks, WAGZ

Re: 1966 parts
 

do you know what the back spacing is on the rally`s? have any trim rings for them? what size tires do you have on them? do you know what year they are from(i have disk brakes on the front of mine-wondering about clearing calipers).

Re: 1966 parts
 

how much of a drop do u have i would love the rims but im to far south to pick them up

Re: 1966 parts
 

2002Yanks; will check out for you tonight and take pictures; not exactly sure of year. pretty sure they will clear stock 12" rotor but will verify tonight. are you talking the 15x6 or the 15x8 set?

thanks, Wagz

Re: 1966 parts
 

C10Chevy66, I have/had air in the back and 3" dropped coils in the front minus a full coil i cut out. I had to remove the bump stops and am running lowered shocks; If you want, when I tear the front end apart, I am going to full air in the next few weeks, I will give you the coils for $20 plus the ride...

Let me know,

The tire size on the front is 216/60/15, but they are shot...

thanks, Wagz

Re: 1966 parts
 

i was talking about the rally set(15*8 back 15*6 fronts). need the fronts to clear stock disk setup rears are drum.

Re: 1966 parts
 

2002Yanks, sorry for delay; not blowing you off.... have been laid out with this damn cold/flu/whatever that is going around... walking pnemonia. YAY!

will get you measurements/pics asap.

Poly track arm bushings SOLD!!!

Top Radiator mount SOLD!!!!

Turn signal housings SOLD!!!!

1 pair alum turn signal bezels SOLD!!!

Thanks 78f1Hundo... PM sent.

Let me know if anyone else wants anything... all OBO!!! or will pack back in cabinet.

thanks for looking, WAGZ

Re: 1966 parts
 

no problem.

Re: 1966 parts
 

78F1Hundo = package sent, thanks again... here is your tracking number via UPS = http://wwwapps.ups.com/ietracking/tr...0X350370274090


2002Yanks, pulling front apart tonight - will finally get you the pics/measurements you asked for about the rally wheels


thanks again, check out my build thread.... elbow deep in 60-66 builds..

WAGZ

Re: 1966 parts
 

2002 yanks, here are the pics finally of the rally wheels; they clear front disc brakes


thanks again for looking,

WAGZ

Re: 1966 parts
 

Here is the complete hub to hub 66 front end w/ lowered shocks from cpp minus 1 coil; manual box; steering linkage; upper/lower a arms;

take a look, make an offer......

asking $$ MAKE AN OFFER $$

thanks for looking,

WAGZ

Re: 1966 parts
 

could i get you to measure one more thing please? could you measure the fronts(ones with tires) from the flat(were the lugs go) out to the outside edge? the pics make them look like 8" rims. they look like they match the back rims for front depth(maybe measure the rears too). sorry to be a pain, but just want to make sure before comiting to drive 5 hours. thanks!
Kevin

Re: 1966 parts
 

2002Yanks..... sent you a PM.

Re: 1966 parts
 

2002Yanks, here is the pics of the measurements front and back of the wheels; looks like backspacing is the same on both wheels; fronts are approx. 1 1/4" narrower on the front side. send me a PM and let me know.

WAGZ

Re: 1966 parts
 

Here are the pics of the center caps and the trim rings; front trim rings are narrow, aprox. 1 1/4" and the back rings are wider, aprox. 2 1/2".

let me know,

WAGZ

Re: 1966 parts
 

The front narrower wheels are NOT 15 x 6; they look like 15 x 7 front and 15 x 8 rears; look @ the measurements...

Would love to get rid of the "big" stuff and would hate to scrap it but need it gone, so make me an offer...

especially for: allllll OOOr BBBBest OOOffer!!!!!

stock 66 rear = 6 lug $50
71 wheels/caps = 5 lug $50
later model wheels/caps/trim rings = 6 lug $125
complete stock 66 front suspension $75
pair stock 71 spindles $25
pair stock 87 spindles $25


if you need any pics/descriptions/etc let me know.

do NOT want to ship any of this, but willing to meet w/in a reasonable distance if it will help you out...

thanks for looking,

WAGZ

Re: 1966 parts
 

6 lug wheels/caps/rings gone pending payment from 2002Yanks...

thanks again man!