The shuddering s-box- 1980 Mazda 626
 

Hi, I'm Chip, been here a while, been trying to contribute. I did a frame-off for my dad (Yeller) and have an 87 GMC SWB Waiting in the wings (LBT).

To that end, I do a little side hustle from time to time and a friend has been on me to take this on. Then he got over to see Yeller, and now he's really hyped up. So, it's here. It's a family deal for him, I think his uncle owned it. Anyway, you think getting parts for a '48 Chevy truck is hard, HAH! All these cars rusted to pieces, and were throwaway to begin with. Then you gotta deal with the folks that have them, won't ship! GAAAH!

But I digress. Anyway, Tom dropped it off today and we stripped all the major chunks off, test fitted the one new fender we could get someone to ship, and testfitted out my fakackta idea for a patch panel, which should work pretty good. This oughta be an adventure, 'cause it's the outside edge of my meager skills. But, like a friend of mine says, Sometimes ya gotta make sure they still clank. Otherwise, why bother? So, away we go! Off to the pics-

Tom pulling parts-
Attachment 1096359

Driver's fender-note missing bottom, but not too bad.
Attachment 1096360

NOS Pass fender- got F'ed on the shipping from Tucson, but we got it!
Attachment 1096361

The nose-not bad....
Attachment 1096363

Pass side-
Attachment 1096365

Re: The shuddering s-box- 1980 Mazda 626
 

More pics- there's some rot in the rockers, not bad. Big dent in the roof, not bad. Bottoms of both fenders gone-not bad. Quarter Drops skins all bubbly and crusty-ehhh, and Dr. Quarter lip completely gone-Oy! We'll see!

Tom's famous!
Attachment 1096375

Big gonk in the roof-
Attachment 1096376

As delivered-
Attachment 1096377

Opened up-
Attachment 1096378

My idea for the patch, which is the front of the pass front fender. Not to shabby, eh? We'll see how it goes, but I'm kinda encouraged.
Attachment 1096379

Thanks for playin' along, it's a new adventure!

Re: The shuddering s-box- 1980 Mazda 626
 

What a sweet car. I am soooo jealous :uhmk: .

Tom must really want that car.

Re: The shuddering s-box- 1980 Mazda 626
 

It's a family thing, and it'll be his daily bomber. I'm kinda getting fond of it. I like the early Jap stuff, really simple.

In the "one thing every day" vein, ordered the .023 easy grind tonight. That stuff is nigh to impossible to get locally. Found it on amazon of all places.
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

I hear you on the early jap stuff. There was a early 80's Corolla (the wagon looking 2 door) that had the bumpers shaved and was flat blacked bombing around where I work. It was actually pretty cool (for a Corolla).

I guess this might be a bad place to say I have really been eyeing Mini Cooper S's here on the truck board, huh?

Re: The shuddering s-box- 1980 Mazda 626
 

Naaah. I actually kinda like the fiat 500 abarth, though I admit to being influenced by the commercials. Gawd, that girl is hawt!
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

Got my easy grind in, finally got out to the garage tonight. Ground out all the Pass side lowers, and SCHNIKIES! This was supposed to be the good side! Take a look-

Attachment 1098558

Attachment 1098559

Attachment 1098560

Attachment 1098561

Attachment 1098562

Re: The shuddering s-box- 1980 Mazda 626
 

That was just the front- wait'll ya see this!-

Attachment 1098565

Attachment 1098567

Attachment 1098568

Attachment 1098569

Well, this oughta be interesting.

Re: The shuddering s-box- 1980 Mazda 626
 

Ain't nothin' for a stepper. PS, some of the screen from the filler work is still there....

Re: The shuddering s-box- 1980 Mazda 626
 

Heh, you noticed! Yeah, this is a fine kettle of fish were in here.
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

This will be fun to watch. Alternate for sure!

Re: The shuddering s-box- 1980 Mazda 626
 

Just take it one area at a time. Keep your heat setting low on your welder and make small tacks when you're doing the patches. Those cars have extremely thin sheet metal and it'll warp like crazy if you put too much heat on it.

Those early 626s are really rare nowadays. You never see them on the road. I owned an '86 626 GT Turbo back in the late '80s. Fun little car.

Re: The shuddering s-box- 1980 Mazda 626
 

Weeel, so we found major rot on the "good" side. So now what to do? I ain't Marcel, or Bernt, or Fournier. But, I got a welder and a zip wheel and I'm good for a laugh. So, I went to PNP today and got to lookin at stuff. I noticed that a 90's s10 seemed similar, so for $15, I cut the tails off a bed, then went and bought some sheet steel from the drop bin at the metal place. Brought all this home, and it just might work out with a nip and a tuck. Got busy and Fabbed a drop for the quarter and fit up the outer, not too bad! I'll finish the inner out and POR it tomorrow. Feeling a bit better about things. To the pics-

'murican steel, Baby!
Attachment 1099435

Bad spot in the front of the well, too. Got a little chunk for that too.
Attachment 1099436

Juuust a little crap in there. Note window screen.
Attachment 1099437

Not too bad! A pleasant surprise.
Attachment 1099438

New main inner, just gotta finish the ends.
Attachment 1099439

Stay tuned!

Re: The shuddering s-box- 1980 Mazda 626
 

Geez, Chip, what do you do for real fun? Stick bamboo splinters under your fingernails?

Re: The shuddering s-box- 1980 Mazda 626
 

Ha, It does seem a tad masochistic! Stacy says it's good for me. I miss making stuff and thinking creatively for a living. I was really kind of enjoying the metalwork toward the end of Yeller. So, I'll give it a whack.

Re: The shuddering s-box- 1980 Mazda 626
 

You need to turn that frown upside down, mister! Looks like you are making some progress.

Re: The shuddering s-box- 1980 Mazda 626
 

I know! Oddly, I was in a pretty good mood when he took that. Musta been concentrating.
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

Now that's using your head! Good call on the S-10 stuff, and the you can't beat the price!!

Is this car going to get re-sprayed when the metal work is done, or are you guys trying to get this car dialed in for the vehicle inspection? Do you guys have inspections in your state?

Re: The shuddering s-box- 1980 Mazda 626
 

Thanks! I've been a big s10 guy, and it seemed familiar when I was grinding. Took a look and yup, looks similar. It's a big relief, wasn't sure what I was gonna do. It's gonna get sprayed nice, our inspection is just mechanical, no prob there.
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

So, I've been working. Lemme see, rear inner drop finished, inner pinholes welded, inner primed and painted, outer fit up, rockers cut out, patches fabbed, rust treated, washed and por'ed as much as could be reached. Should be welding 'er up later this week. Still gotta come up with an edge for the outer, may go cut the rest out of that s10. Anyway, here's pics-

Attachment 1100939

Attachment 1100940

Attachment 1100941

Attachment 1100942

Attachment 1100943

Nuthin' but a chicken wing on a string. I'm kinda stoked, got new TIG gloves today (the old ones had holes in the fingertips! ouch!) and when I get all this rocker mess done, I'm gonna put my new EZ-grind in and give that a whack. Stay tuned-

Re: The shuddering s-box- 1980 Mazda 626
 

Ooooh, just found this.

Watchin'



or I'm aboard Mehearty.

Re: The shuddering s-box- 1980 Mazda 626
 

Yarr! Got to live up to the Bomp standard!

Ok, bought some proper tips, bought the welder from Uncle Matt, switched in my ez grind. Come to find out I had .035 in all this time! So now, .023 with a proper .023 tip. Welded in 2 patches last night with the ez grind. THAT was a learning curve. Takes a LOT more wire speed. Had to revert to the far extreme method to dial it in. But, it's the BOMB-BEE when you get it down good, and it grinds like butter but ironically, it lays down and melts in a lot better than the standard stuff. Git some today. The wire, too!
Posted via Mobile Device

Re: The shuddering s-box- 1980 Mazda 626
 

So, the rocker patches are in. Stilll have to grind, but they're in, not too bad. Had one shrink a bit, but it's still within spec for a skim to make it right. I have to remember my own advice about going slow. Also, these magnets in the pics are AWESOME. 30 lb. Lift magnets from HF. just right for holding sheetmetal flush, like a second hand. Run, don't walk, and get some, they're cheap. Oh, yeah, I went down and cut out the rest of the s-10 this weekend. Here's your proof-

Attachment 1104249

Attachment 1104250

Attachment 1104251

Attachment 1104252

Attachment 1104253

Re: The shuddering s-box- 1980 Mazda 626
 

Looking good! Did you get your EZ Grind wire locally? I found some online in 11 lb. rolls. I'm guessing the spool diameter is 8" but it's hard to tell from the pictures.

Re: The shuddering s-box- 1980 Mazda 626
 

Ask and ye shall recieve!

Esab 69130051 A/S Easy Grind 025 X 2# Spool -...

This is a 2# roll. $40 all in. Cannot be had locally, not stocked and order qty not enough. Just as easy off Amazon.

Oddly, I was remembering what I told you as I was doing this. "slight tip in, aim at the last tack," I'll go shotgun if I don't talk myself down. I wasn't sippin' either, and that seems to help, actually. This stuff REALLY likes a tight fitup. The third pic had a nice fit at the back and bottom of the left side of the patch. Zip zip, done! Tom's coming out to grind welds tonight while I attempt the chicken salad outta chicken poo trick on the quarters. Wish me luck!