Pics of pie'd or notched upper control arms
 

I've got a 66 c10 on a budget and I'm trying to get as low as possible in the front without going with a drop member or tubular c arms. I just got a set of McGaugys 2.5" drop spindles and I've already cupped my lower control arms, but when I lay it out, my upper control arm ball joint binds and stops me from going down another inch or more.

Can I see some pics of how and where you guys are cutting your upper control arms so that I can correct the upper ball joint angle.

Re: Pics of pie'd or notched upper control arms
 

Does anyone have any better ideas of how I can get another inch or so lower without cutting the upper control arms? I'd still like to see some pics of how other guys have done it too.

Re: Pics of pie'd or notched upper control arms
 

This might be helpful: http://www.streetsource.com/Groups/9/Topic/57086

Or...

Lower the cab mounts an inch.