The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 60-62 Motor Mounts (https://67-72chevytrucks.com/vboard/showthread.php?t=577561)

mykey51

04-26-2013 10:15 PM

60-62 Motor Mounts

Hey all.. I have some torn up motor towers they previous owner rigged up. I was looking for ideas/ kits / or anything that is better than what I have. I'm dropping in a SB 383. Help Please.

mykey51

04-26-2013 11:41 PM

Re: 60-62 Motor Mounts

1 Attachment(s)

best shot I have of the hacked towers.

Blue Blood

04-29-2013 07:18 AM

Re: 60-62 Motor Mounts

I'm using a Speedway weld/bolt in tubeular crossmember motor mount, the also sell the sb mounts that bolt up.poly or rubber available on the mounts.
Putting mine in this week along with the transmission.
Posted via Mobile Device

mykey51

04-30-2013 12:15 PM

Re: 60-62 Motor Mounts

Let me know how it goes Blue. Pics would be nice and thanks for the input. That tubular one was what I was looking for.I found a few of them but nothing that would clear our narrow frames. I am not sure if I have the 5.5 inch clearance down low. I am going to do some measuring tonight. Hope yours goes well. :metal:

mykey51

04-30-2013 12:20 PM

Re: 60-62 Motor Mounts

Also, What headers/manifolds you using? Just looking ahead at clearance. The reason they were hacked in the 1st place was because the manifolds couldn’t clear the towers.

All times are GMT -4. The time now is 11:14 PM.