The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Axle flip (https://67-72chevytrucks.com/vboard/showthread.php?t=577912)

ChazCurry

04-29-2013 12:20 AM

Axle flip

I'm wanting to do an axle flip on my 1972 c-20 and was wondering if just a small bolt on c notch would provide enough suspention clearance? and if there are and small details i should be aware of. Any helpful comments are welcome

brad_man_72

04-29-2013 11:37 AM

Re: Axle flip

Well if you have a coil spring rear it will lift the rear.
I will assume you have a truck equipped with the optional leaf spring rear, and stock springs. A small notch will be fine.
Posted via Mobile Device

sKnNyPpY

04-30-2013 11:46 PM

Re: Axle flip

Just did this write up in the Suspension thread the other day. No notch on my 1500, does great over speed bumps and railroad tracks. I did hit axle to frame on a pot hole but the button bump stops kept it from being metal to metal. http://67-72chevytrucks.com/vboard/s...d.php?t=577529

ChazCurry

05-03-2013 10:52 AM

Re: Axle flip

Thanks for the comments and the help guys
Posted via Mobile Device

All times are GMT -4. The time now is 11:41 AM.