The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OK 4X4 Engine, Tranny, T-Case (https://67-72chevytrucks.com/vboard/showthread.php?t=579356)

lawest 05-08-2013 04:27 PM

4X4 Engine, Tranny, T-Case
 
Price reducedRunning 283 engine with accessories, clutch, P plate, bell housing, Clutch linkage, brackets, etc. Not sure of the mileage as it was installed by the PO, but runs strong and doesn't use oil. Engine complete $750500
SM 465 Manual Transmission $250100
Rockwell T-221 T-case w/shifter, etc. $200100
Pick up only, located in central Oklahoma.

MyDad'sTruck 05-08-2013 09:59 PM

Re: 4X4 Engine, Tranny, T-Case
 
Is that a T221 Transfer Case? Can you send me a photo?? Thanks!

lawest 05-08-2013 10:38 PM

Re: 4X4 Engine, Tranny, T-Case
 
it is a T-221. I can get a picture of it tomorrow, but it is still installed so I don't know how well it will turn out.

MyDad'sTruck 05-09-2013 10:56 AM

Re: 4X4 Engine, Tranny, T-Case
 
OK! Thanks. Please do that. Mine is so covered in grease, oil, dirt that I need to clean it off to see exactly what it looks like. I want to keep this simple and if I can get a direct swap, will do that!

lawest 05-10-2013 11:18 AM

Re: 4X4 Engine, Tranny, T-Case
 
1 Attachment(s)
Quote:

Originally Posted by mydad'struck (Post 6061060)
ok! Thanks. Please do that. Mine is so covered in grease, oil, dirt that i need to clean it off to see exactly what it looks like. I want to keep this simple and if i can get a direct swap, will do that!

Attachment 1105244

lawest 05-10-2013 11:19 AM

Re: 4X4 Engine, Tranny, T-Case
 
1 Attachment(s)
Attachment 1105245

lawest 05-10-2013 07:07 PM

Re: 4X4 Engine, Tranny, T-Case
 
Still available

lawest 05-11-2013 09:59 AM

Re: 4X4 Engine, Tranny, T-Case
 
No one interested in this?

67-4x4 05-12-2013 10:04 PM

Re: 4X4 Engine, Tranny, T-Case
 
what year truck is this in you looking to sell rolling frame or truck?

lawest 05-13-2013 02:07 PM

Re: 4X4 Engine, Tranny, T-Case
 
Quote:

Originally Posted by 67-4x4 (Post 6067487)
what year truck is this in you looking to sell rolling frame or truck?

Its in a '69, so wrong engine for that year. It started life as a 6 cyl truck. I am putting in a 350/350/NP205 set up. That's why I am selling the engine, tranny and T-case. Thanks for looking.

MyDad'sTruck 05-21-2013 09:46 AM

Re: 4X4 Engine, Tranny, T-Case
 
Hey, I hope you are ok today and weren't hurt in that storm. I am hoping for the best and hope to hear you are well in central Oklahoma.

lawest 05-21-2013 10:17 PM

Re: 4X4 Engine, Tranny, T-Case
 
Quote:

Originally Posted by MyDad'sTruck (Post 6082586)
Hey, I hope you are ok today and weren't hurt in that storm. I am hoping for the best and hope to hear you are well in central Oklahoma.

I really appreciate that, and yes I am fine. The storm started just NE of me and then moved on in that direction towards Moore. A lot of people were not so lucky, so your thoughts and prayers are welcomed.

71Sixer 05-23-2013 06:31 PM

Re: 4X4 Engine, Tranny, T-Case
 
Wish I was closer...I would buy that tranny off of ya.

Oh well, here's a bump for you.

lawest 12-11-2013 01:42 PM

Re: 4X4 Engine, Tranny, T-Case
 
Well, I just ordered a new GM crate 350 so there is no turning back now. The engine, tranny, and T-case are now out of the truck and still for sale. I will be posting some pics in the next few days. Complete 283 engine with manual bell housing and clutch assy is $500. It was running strong when removed just a couple of months ago. The SM 465 tranny is tight, $100 OBO. The Rockwell T-221 T-case with shifter and adapter is $100 also. The T-221 was used in our trucks from 67 into the early '69 model year before being replaced by the NP205 later in '69. It was only available behind the manual transmissions with 10 spline input. Must pick up in central OK, no shipping.

gmc 2500 4x4 12-12-2013 12:53 AM

Re: 4X4 Engine, Tranny, T-Case
 
if t/c does not sell i would take shifter,bracket and all linkage. let me know, thanx, paul

lawest 12-12-2013 12:37 PM

Re: 4X4 Engine, Tranny, T-Case
 
Quote:

Originally Posted by gmc 2500 4x4 (Post 6414184)
if t/c does not sell i would take shifter,bracket and all linkage. let me know, thanx, paul

Will do. I would really like to just get rid of all of it at once. Perfect for someone with a 67-68 4WD rolling chasis. In fact, if I can't sell it I will be looking for a rolling chasis.:lol:

lawest 12-13-2013 11:28 AM

Re: 4X4 Engine, Tranny, T-Case
 
4 Attachment(s)
More pics
Attachment 1186915

Attachment 1186916

Attachment 1186917

Attachment 1186918

In The Ten Ring 12-13-2013 11:36 AM

Re: 4X4 Engine, Tranny, T-Case
 
I'd LOVE to get a running 283 (tranny would be a definate plus) but I'm in WV.


All times are GMT -4. The time now is 08:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com