cutting lower control arm cups down
 

Starting to bag the front of my 73 c10 using the upper plate and lower cups which are a little over 2inches. How much can I trim off the cup to avoid rubbing if anyone has done before. Thanks
Posted via Mobile Device

Re: cutting lower control arm cups down
 

Wow!!!!!!!!:waah:
Posted via Mobile Device

Re: cutting lower control arm cups down
 

what kind of bags and pictures would help

Re: cutting lower control arm cups down
 

Dominators 2600 AVS upper plate lower cup kit the cups are 2inches tall now wanted to see if anyone knew how much I could cut them down without bag rubbing the arm
Posted via Mobile Device

Re: cutting lower control arm cups down
 

I cut mine down and guess what....they rub

Re: cutting lower control arm cups down
 

i cut some to 1 3/8'' bags rub. put 2'' cups in they work perfect, thats with dominator 2600......

Re: cutting lower control arm cups down
 

thanks for the replys i ended up leaving them at 2 inches and it worked perfect im about 2 inches from control arms touching the ground probally could be lower but when aired out im only able to go so far down till inner fender sits on tire i guess if i removed it would be on the floor

Re: cutting lower control arm cups down
 

exactly the same with mine.... i removed the wheel wells and it pretty much is right at the inner part of fender :( i thought and wanted the control arms were going to hit the ground.....

Re: cutting lower control arm cups down
 

Ok so you did remove inner fenders ? Once removed are you control arms on the ground
Posted via Mobile Device