The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Swapped the TBI need vacuum help (https://67-72chevytrucks.com/vboard/showthread.php?t=580465)

tex_waco_usmc

05-16-2013 09:33 AM

Swapped the TBI need vacuum help

Swapped the TBI out of an 87 (Complete drivetrain swap) into an 86. Got the wiring taken care of but need assistance with the vacuum. Does anyone have a vacuum diagram for a TBI 350 in an 87? Maybe a pic of the underhood sticker so I can make sure I have these going the right place!

Thanks in advance.

manimal

05-16-2013 10:54 AM

Re: Swapped the TBI need vacuum help

Check out the TBI SWAP thread.

LEEVON

05-16-2013 11:02 AM

Re: Swapped the TBI need vacuum help

1 Attachment(s)

Google search came up with this:

tex_waco_usmc

05-17-2013 09:51 AM

Re: Swapped the TBI need vacuum help

Yes Sir! Right after I posted this thread I did a google search in images and found that same diagram. I now have the truck's vacuum system plugged in/routed properly, minus the broken nipple on the cruise control servo.

All times are GMT -4. The time now is 10:30 PM.