8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Lowered Price = $500 shipped in the CONUS

Trying to sell some extra parts before I move. Up for sale is a 8 cyl tach instrument cluster with vac and 80 lb oil pressure gauge that I restored for my truck but didn't end up using. It is all original GM parts except the new bezel and a couple rubber grommets. I repainted all of the needles (they are all the same color, the camera flash made them look different), cleaned the gauge faces, stripped and repainted the inner and outer tins, lightly polished the lens and replaced the bezel. I even repainted the faded red mark in the temp gauge. I didn't reset the mileage to zero, I'm not sure how to do that besides a drill and that takes forever.

I installed it in my truck and verified everything is fully functional. I hooked up a vacuum pump to the vacuum gauge to make sure it works since my truck isn't plumbed for a vacuum gauge. I will include a new tach harness with it as well. $550 shipped to your door

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

It's gorgeous, just not in the budget at this time. Here's a bump for ya!

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Thats exactly what I want for my truck, is there any thing you still need for your may be a partial trade and cash if I have something that you need?

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Unless you have a NOS 1967 Camaro passenger side quarter panel I can't think of anything else I need right now :lol:

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

As a matter of fact I think no just kidding LOL I understand I will try to come up with the dough good luck on the sale in the mean time

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

That would have been too good to be true!


Sure would like to see this go to a good home :chevy:

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Price drop - $500 shipped, I'm losing money at that price

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

8IQAP!z

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

??
Posted via Mobile Device

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Any chance you have a diesel tach?

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Pm inbound
Posted via Mobile Device

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Still available :chevy:

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

ttt

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

ttt

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

ttt

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Would you take $450 shipped to Amarillo TX 79106, pretty please with sugar on top. Hey I am going to go pickup some truck parts from a man that has thousands of square feet of nos parts to include sheet metal in 3-4 weeks. He is into Camaros and Chevelles I bet he has your nos 67 passenger fender, I will ask him. What would be a fair price for that fender? I purchased a complete front nos clip for a 70 pickup from him.

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

I really can't afford to lose that much on the cluster, the best I could do is $480 shipped. If you don't mind asking I will PM you a small list of NOS parts I'm looking for :chevy:

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

I will have to think about the offer of 480, thanks. Yes you can pm me a SMALL list of your dream nos list.

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Ok I am going to bite the bullet and I will take it for the 480 shipped with a new non hei tach harness. Thanks for the good deal. Pm me with payment instructions.

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Sounds good, I believe all of the new harnesses are for HEI, you will have to cut off the HEI clip and crimp on a spade to install it on a ignition coil. Let me know if that works for you and I'll PM you the payment info

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

That is all right on the tach harness. I will take it . Pm me for payment instructions.

Re: 8 cyl Tach instrument cluster with Vac and 80 lb oil pressure
 

Sold!