Byrne's C10 First Build
 

Hello all:
So I haven’t built alone and haven’t been part of a built in the past 20 years, I’m pretty lucky to have picked up a 69 C10 with a stock 350 / 400 trans for $500. It came with a set of good fenders, passenger side door, after market and rims (goofy aluminum rims sold for $500) and headers. So needless to say I have always love c10’s and I am completely stocked to have this opportunity. I will post some pictures.
Mike

Re: Byrne's C10 First Build
 

Best of luck on your project! Looking forward to seeing some pictures.

Re: Byrne's C10 First Build
 

Re: Byrne's C10 First Build
 

Re: Byrne's C10 First Build
 

http://i1263.photobucket.com/albums/...e/image10.jpeg

http://i1263.photobucket.com/albums/...e/image16.jpeg

http://i1263.photobucket.com/albums/...e/image17.jpeg

http://i1263.photobucket.com/albums/...ne/image7.jpeg

http://i1263.photobucket.com/albums/...e/image15.jpeg

Re: Byrne's C10 First Build
 

thank you srvivor71!

Re: Byrne's C10 First Build
 

Looks like you got the pics to work. What are your plans for it? The more pics the better here!
Posted via Mobile Device

Re: Byrne's C10 First Build
 

Hello 1972supersb - thanks for your help!

The plan now is to get new rockers and floor pans in. I pre-mutually ordered cab corners and inner and outer rockers thinking the floor was in better shape. I am now going to return the inner rocker and order pan / rocker from brothers.
For the wheel wells I think I will patch sand and spray, all things considered they aren’t that bad. When I pulled and notice the fire wall I realized a decision need to be mad.. How much can I afford and how quick do I want to bring my boys and wife out on the road!
For the fire wall I am going to fab a patch and weld in, since I have fenders I plan on cleaning them up a little and installing.
In the end I want to drop it and keep a clean look, power breaks etc.

More pic's to come !

Re: Byrne's C10 First Build
 

oh BTW, i though the door was great. that is the original purchaser in 69, I have all the original paper work as well. Lex Service Garage purchased for $2392.45 in 69, they are still open. i will have to bring the truck by when i am done.

Re: Byrne's C10 First Build
 

That's cool you have some original paperwork
Posted via Mobile Device

Re: Byrne's C10 First Build
 

You certainly have some work ahead of you! It does look like you have a lot of parts still intact, which helps a lot. I actually decided to switch cabs as mine had too much rust in too many places. Best of luck with the build, and all that rust!

Re: Byrne's C10 First Build
 

Good price! Paperwork is always nice to have. When you get a chance, post a pic of the SPID.

Re: Byrne's C10 First Build
 

Hello leftybass209, yes a lot of work. last night i pulled the tank and found more rust. I will have to fab replacement panels as i do not want to buy a new floor. Filing in the cab corners looks tricky.

Re: Byrne's C10 First Build
 

yuccales, thanks for your comment. Yes, i have the original sales receipt, metal plate and owners manual.

Re: Byrne's C10 First Build
 

Last night i wanted to remove the cab corners, they had been replaced (rivet and fiber glass). After seeing the rot towards the back of the cab I decided to remove the gas tank.
http://i1263.photobucket.com/albums/.../image9-1.jpeg

http://i1263.photobucket.com/albums/...image10-1.jpeg

http://i1263.photobucket.com/albums/...image11-1.jpeg

Re: Byrne's C10 First Build
 

I also worked on pulling the stock exhaust manifold, i though i had a good set of headers but.... they aren't going to work.

http://i1263.photobucket.com/albums/.../image3-1.jpeg

http://i1263.photobucket.com/albums/.../image6-1.jpeg

Re: Byrne's C10 First Build
 

Here is a pick of my tool box, its about as old as the truck - love it. When i was a kid a great mechanic Ray (Staten Island NY) had the same box - always wanted one (thanks Craig s List!).

http://i1263.photobucket.com/albums/.../image1-1.jpeg

Re: Byrne's C10 First Build
 

Here is a stamp for the block, any info would be great. I think its a 4 bolt, what are a good set of low priced headers? STAMP - 3932386

http://i1263.photobucket.com/albums/.../image4-1.jpeg

Re: Byrne's C10 First Build
 

Bummer on all that rust! I wish I had came on these boards before I purchased my truck, not knowing a cheap swb fleet is a red flag. Hopefully you can get all that taken care of with minimal headache.
Posted via Mobile Device

Re: Byrne's C10 First Build
 

I KNOW! i am still very happy to have the project and looking forward to perfecting my welding skills. looking for a break to bend sheet metal. and want headers asap in case i need to pull it out for another repair.

Re: Byrne's C10 First Build
 

http://www.73-87.com/chevy_ids/sbcid2.htm

Years:1969 Casting:3932386 CID:350 Low Power:300 High Power:350 MainCaps:4

Re: Byrne's C10 First Build
 

JHT67 thank you!

Awesome, original engine. I was bummed out when i went in the house after messing with the truck last night. lot more rust then i though and was telling my self the engine was swapped.

Re: Byrne's C10 First Build
 

Sucks about all the rust. I'll be following along to see how it turns out
Posted via Mobile Device

Re: Byrne's C10 First Build
 

Just noticed where your from, we stayed at the hillside lodge last summer, thankfully for only one night, as we were just passing through. There was some beautiful scenery, but that place looked like it was stuck in the 70's. We also learned real fast that taking a stroll through the woods there wasn't like taking one here in central Ohio. Headed up a path, about 20 yards in front of us, had a black bear pop out, he ran one way, us city slickers ran the other. No black bears in the Columbus metro parks :D

Re: Byrne's C10 First Build
 

JHT67, very much stuck in the 70's - down in town is starting to catch up. If you pass through again feel free to reach out and I can direct you to a nice please and great food. Most people in my neck of the woods take the 1:30 drive to NYC or Philly! My house backs the Delaware State Forest, love it.