The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AZ Longbed floor/ Toolbox door/GMC tailgate (https://67-72chevytrucks.com/vboard/showthread.php?t=581297)

t korinek 05-22-2013 10:44 AM

Longbed floor/ Toolbox door/GMC tailgate
 
5 Attachment(s)
Long bed floor, straight, has pitting, still solid & not rusted through $200

Tool box door $150 hinges are kinda rough & middle one is broken. another $20 for the fiberglass box, also is a little beat up + shipping

GMC tailgate in good shape, some dents on the inside & a few across the top, outside looks great. $175 + shipping

t korinek 05-22-2013 10:47 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
5 Attachment(s)
More pics of tool box door

t korinek 05-22-2013 10:55 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
5 Attachment(s)
& a few more pics of the door

mytruck70 05-22-2013 06:05 PM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
pming you about tail gate and tool box

71blksuper4x4 05-22-2013 06:34 PM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
I'll get in line on the toolbox door Tom. Also, curious Tom, if you get a suburban in, I need 2 areas cut out at the base of the pillars and about a foot diameter cut out from the floor attached to it. Thanks Trevor

t korinek 05-22-2013 07:27 PM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
Mytruck70 shipping on just the tool box door is $20
shipping for the door & fiberglass box $42
Shipping on the tailgate is $63

The shipping is lowest separately.

Trevor shipping on the tool box door is $19 if mytruck70 passes.

mytruck70 05-24-2013 11:16 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
pass on the tail gate steel thinking on the tool box mine came with 1 but the door was shoot and the pass fender was wrecked in the rear so I sold the bed was going to take off tool box but guy insisted on keeping It

t korinek 05-25-2013 11:42 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
Mytruck70 no problem.


Trevor, toolbox door available if interested, ill keep you in mind if we get a suburban to part out.
Thanks
Posted via Mobile Device

bigrigpardo 06-24-2013 09:19 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
hey do you still have the tool box door and box???????

t korinek 06-24-2013 10:22 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
Yes still have the tool box door, box & tail gate, floor is sold.
Thanks

DREW67 06-24-2013 10:37 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
Would you have a nice set of wheel tubs?

bigrigpardo 06-24-2013 11:04 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
would you do 175 shipped to 07646??? for the door and box

71blksuper4x4 06-24-2013 08:01 PM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
Tom, I apologize for not getting back with you. I never seen that he backed out on the door. If BigRig passes, put me back inline. Once again, my apologies. I thought he was for sure taking the door, and didn't check back. Trevor

t korinek 06-25-2013 01:25 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
bigrigpardo, I'd do $185 shipped
Trevor, no problem, kinda lost track of this thread myself, you are up again if bigrigpardo passes.

DREW67 I have one nice inner, not both.

bigrigpardo 06-25-2013 10:08 AM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
sweet I will take the tool box did u see my other post in your parts truck thread about the small stuff I need with this.

bigrigpardo 06-26-2013 09:18 PM

Re: Longbed floor/ Toolbox door/GMC tailgate
 
just sent you the money for the door box weather strip and grommet


All times are GMT -4. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com