The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Stock wheel sizes? (https://67-72chevytrucks.com/vboard/showthread.php?t=581628)

yossarian19 05-24-2013 08:25 PM

Stock wheel sizes?
 
What are the stock wheel sizes on a '59? Near as I can tell, it's 15x6.5 or so with 4" back spacing. I don't trust my "near as I can tell" measures, though, when I'm about to spend some money on wheels to clear my new steering box.

yossarian19 05-25-2013 01:19 PM

Re: Stock wheel sizes?
 
OK - I was close. These wheels are 6" wide with a 9/16 offset, which translates to 4 1/8" or so back space.
So.
I needed about 1/2 to 5/8" worth of stacked washers for my current 235/75/15 tires to clear the steering box.
Back space is the relationship between the inside of the rim & the hub mounting pad. So if the back space is the same, rim width shouldn't affect clearance at the box. Right?
I'm thinking a 3" back space 15x8 rim should work. I might at some point go to 30x9.5x15 tires when the 235's wear out...

NEWFISHER 05-26-2013 07:25 PM

Re: Stock wheel sizes?
 
I'm no help, my 50 was wearing 5.5 inchers
Posted via Mobile Device


All times are GMT -4. The time now is 01:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com