New to site and classic rebuilds! *Bay Area*
 

Hey guys, hows it going? I'm from SF bay area and I'm just gettin into restoring a '67 C-10 Step-side that was handed down from my dad.. The body is pretty strait but there was no drivetrain.

I recently dropped at 4 bolt main 350 with 1.94 camel hump heads, with a Crane hyd roller 284/292 duration .509/.528 lift. Edelbrock RPM intake manifold. (That's as far as the motor is done so far)

... all hooked up to a TH350 and a stock rear end

2" Dropped spindles with disk conversion on front.

I need a lot of work to make this truck handle this motor, but so far I just want to hear it turn on!

Well, I look forward to posting and getting insightful feed back!

Re: New to site and classic rebuilds! *Bay Area*
 

:welcome2: from OKC!

Re: New to site and classic rebuilds! *Bay Area*
 

Welcome to the forum from SoCal!

Re: New to site and classic rebuilds! *Bay Area*
 

:welcoem: