The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   AZ REBUILT Floor shift and automatic tilt steering columns 1979and newer (https://67-72chevytrucks.com/vboard/showthread.php?t=582275)

1774btcrew 05-29-2013 01:53 PM

REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
REDUCED THE PRICE ON THE AUTOMATIC COLUMN!For those of you familiar with my work you know I strive to provide the best quality parts possible. All parts are cleaned, inspected, and painted and polished when needed. For those of you that are not ask around. I have dealt with many members on here. I have been rebuilding steering columns for several years and all of my customers have been pleased. There are THREE steering columns available. All have the double D lower shaft with is compatible with the Borgenson intermediate shafts. These greatly reduce the play in steering as these get rid of the rag joint. The intermediate shafts are available to the PURCHASER of a steering column for an additional $35. No intermediate shafts will be sold separately.


I am just finishing up a complete rebuild on a 84 and newer MANUAL floor shift tilt steering column with key release lever. It has an ignition switch with key. This has been completely disassembled down to the last nut, bolt and bearing and all worn parts have been replaced. Loctite has been used on the lower 4 bolts that always become loose so you will never have a problem. There are absolutely no issues with this steering column. I have pictures of the rebuild process I will post now and post the finished photos later today. PRICE ON THIS COLUMN IS $325 FIRM not including shipping.

I also have a 1979-1983 MANUAL floor shift tilt column that has been completely rebuilt. All the same specs as above. PRICE IS $325 FIRM not including shipping.

Last is a 1979-1983 AUTOMATIC tilt steering column. It has been completely disassembled, cleaned and regreased with all worn parts replaced. It too has had the lower 4 bolts removed and Loctited so there will be no future problems. Price on this AUTOMATIC column is $175 FIRM including shipping WITHIN THE USA.

Below is the picture of the 84 and newer floor shift tilt steering column showing it was COMPLETELY disassembled
http://img.photobucket.com/albums/v9...pse6ec0135.jpg
http://img.photobucket.com/albums/v9...psef65bfa0.jpg
http://img.photobucket.com/albums/v9...psd4d3a955.jpg
http://img.photobucket.com/albums/v9...ps03824fda.jpg
http://img.photobucket.com/albums/v9...ps9b86afa0.jpg
http://img.photobucket.com/albums/v9...ps77fb5674.jpg
http://img.photobucket.com/albums/v9...psad45918b.jpg
http://img.photobucket.com/albums/v9...ps9b86afa0.jpg

1774btcrew 06-05-2013 09:29 AM

Re: REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
Ttt
Posted via Mobile Device

1774btcrew 06-11-2013 01:04 AM

Re: REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
ttt

1774btcrew 06-13-2013 11:47 PM

Re: REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
ttt

1774btcrew 06-18-2013 12:26 PM

Re: REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
ttt

1774btcrew 06-27-2013 09:13 PM

Re: REBUILT Floor shift and automatic tilt steering columns 1979and newer
 
ttt


All times are GMT -4. The time now is 05:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com