The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Question on my wheel backspacing (https://67-72chevytrucks.com/vboard/showthread.php?t=584388)

AnotherC10

06-12-2013 11:21 AM

Question on my wheel backspacing

I'm not sure if I am puting this in right spot or not. I am building a 85 C10 shortbed 2wd. It's getting baged, z'ing the frame and cupping lower control arms. I am either running 22"x 9.5"or 24"x9.5" wheels. What back spacing is everyone running to get your wheels to tuck and not hit my fenders? Would 6" be enough? Thanks in advance.

wraprail

06-16-2013 11:30 AM

Re: Question on my wheel backspacing

Hello and Welcome. Didn't want you to think your question wasn't important. I think 6" would work but 5" would be ideal.
But you should awalys measure for yourself to be sure.

AnotherC10

06-16-2013 11:32 AM

Re: Question on my wheel backspacing

Thanks.
Posted via Mobile Device

All times are GMT -4. The time now is 06:00 PM.