another 1972 one ton
 

whats left of a 72 custom 30 with a 402/ sm465 4 spd. the engine ,trans, a/c , and most of the interior were already gone
it`s rough and wont be around here very long. none of the sheet metal is any good but it still has a few pieces on it.

ign switch with both door locks $45
black door panels, they`re dirty the pass side has some scrapes on the lower front. $65
custom 30 emblems $30
V8 400 emblems $15 1 has a broke stud
grill emblem $15
ho72 rear chunk 4.11 gear $175 single leg, not a no spin
clutch & brake pedals $35
stainless windshield trim $30
ps sector $50.
sway bar with brackets $50
softray tinted vent windows $50. pass side channel is bent.
softray tinted side glass $50
all prices are plus shipping

Re: another 1972 one ton
 

What size is sway bar and shipping to 30530. Thanks Dale

Re: another 1972 one ton
 

intrested in any clutch linkage left?

Re: another 1972 one ton
 

Is it a 157" WB or 133" WB?

Re: another 1972 one ton
 

Interested in cab lights and wiring . How are the lenses? Price shipped to 92683. Thanks
Posted via Mobile Device

Re: another 1972 one ton
 

Interested in the ho72 chunk if its a posi, and front frame rails if your going that far. Let me know prices and shipping to 48030
Posted via Mobile Device

Re: another 1972 one ton
 

Interested in the drive shaft if it's a 133" WB

Re: another 1972 one ton
 

undone- the sway bar is 1.1/16" it will be a few days before I can get it off
gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping
hard_rain420- it`s a 157"
gmclonghorn- the cab lenses are cracked and crazed, looks like rats have chewed the wiring.
matts customs- the chunk is not posi, how much of the frame rails do you need?
pics for dirtwork

Re: another 1972 one ton
 

Interested in antenna pending pics
Posted via Mobile Device

Re: another 1972 one ton
 

how is the drivers door? any rust issues?
thanks

Re: another 1972 one ton
 

I might be interested in some of the cab light lenses if GMCLonghorn isn't, even if they are crazed. I think a couple of mine are missing. Are they still in one piece? Frank

Re: another 1972 one ton
 

gmc25004X4- the only piece left is the bracket that is riveted to the frame. $10 plus shipping

not sure if i need this for a bb swap?

Re: another 1972 one ton
 

If its a 2wd I need from front suspension forward. Let me know

Thanks, Sam

Posted via Mobile Device

Re: another 1972 one ton
 

I will pass on the cab lights to fesser
Posted via Mobile Device

Re: another 1972 one ton
 

what rearend?

Re: another 1972 one ton
 

crushing- no antenna , only the base.
nobolt- everything is rusty on this one
fesser all the cab lights are broke.
gmc25004X4- there are at least 2 different type brackets riveted to the frame. but I don't think this one is big block only.
matts customs- $40 plus shipping on the frame rails.
c20pickup- ho72 rearend, 4.11 gears

Re: another 1972 one ton
 

Could you check shipping on the differential assembly to 21771? Yeah,I know it's heavy

Re: another 1972 one ton
 

That ho have a locker? No-spin?
Posted via Mobile Device

Re: another 1972 one ton
 

the 3rd member should be about 105 pounds...if that helps

I may be interested in a roof patch with the marker light area. how bad is the lip at the top of the windshield?

Re: another 1972 one ton
 

Which bearing does the HO third member have? And is the bearing in good shape? Can. You get some pics of the third member? I don't need shipping I could drive over and pick up.
Posted via Mobile Device

Re: another 1972 one ton
 

special-k - Tim, I checked the ups website. calculated the shipping costs to be about $90. that's if the chunk weighs 105 lbs. tried the post office too, but they have a weight limit of 70 lbs. it`s still in the truck right now, once I get it out I can check the weight.

c20pickup- not a (no spin.)

nobolt- the roof is rusty pics added

496bb- I cant tell you about the bearings except to say it has them. can you tell from the pic?

Re: another 1972 one ton
 

Ill definitely take the rotors if they are good let me know. Ill take both saddles for sure also. Contact me to set everything up.

Re: another 1972 one ton
 

I'm gonna pass on the frame rails, found them locally. Thanks though.
Sam
Posted via Mobile Device

Re: another 1972 one ton
 

About 100 bucks isn't too bad. But,if it's the diff this other feller who can pick it up wants,I'll pass it on. If not,I'll ponder a bit. I'd want it for my wrecker w/5.14s that it really doesn't need these days. Thing is I'm selling it and maybe should let the next guy worry about that. I can't stop messing with it cuz I guess I really wish I could keep it!

Re: another 1972 one ton
 

Interested in the screws for the marker lights if they're original and in good condition.