The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)
-   -   SM465 Cover Help (https://67-72chevytrucks.com/vboard/showthread.php?t=584993)

79Betty 06-16-2013 09:58 PM

SM465 Cover Help
 
Guys i need some help. While going from my th350 to sm465 my strap broke and so my sm465 fall to the ground about 2 foot... Since then i've been trying to get the top cover off to check it out and can't. In reality i don't know what would be bad or good so i need some help. Any idea's?
Posted via Mobile Device

Tx Firefighter 06-16-2013 10:13 PM

Re: SM465 Cover Help
 
I wouldn't worry about dropping an SM465 from 2 feet. I'd guess you could drop one from 20 feet and the damage would be to the concrete more than the trans.

If it didn't crack something obvious or damage anything external you shouldn't have to worry much. The internals are guaranteed not damaged.
Posted via Mobile Device

79Betty 06-16-2013 10:29 PM

Re: SM465 Cover Help
 
But part of what made me second guess that is it's in 2nd or 3rd and i can't get it to take other gears. It won't even try.
Posted via Mobile Device

Tx Firefighter 06-16-2013 10:34 PM

Re: SM465 Cover Help
 
Did it land on the shifter ?
Posted via Mobile Device

79Betty 06-16-2013 10:36 PM

Re: SM465 Cover Help
 
On the input shaft/bottom of case seemed more on shaft though. The shifter was out.
Posted via Mobile Device

LynnJr 06-17-2013 12:20 AM

Re: SM465 Cover Help
 
Sounds like reverse slid on you when you put the cover back in place.I put some grease on the shaft to hold the gear in place while installing the cover.

crazy longhorn 06-17-2013 02:10 AM

Re: SM465 Cover Help
 
Quote:

Originally Posted by Tx Firefighter (Post 6126923)
I wouldn't worry about dropping an SM465 from 2 feet. I'd guess you could drop one from 20 feet and the damage would be to the concrete more than the trans.

If it didn't crack something obvious or damage anything external you shouldn't have to worry much. The internals are guaranteed not damaged.
Posted via Mobile Device

I think Tex told it "square up"....pretty hard to break that big monster! As he said, look for any cracks in the case? Oh.....you might need some concrete help:lol: Longhorn

79Betty 06-17-2013 06:14 AM

Re: SM465 Cover Help
 
The case is fine, so's the input shaft. But now it won't free shift... Which is what started the 2nd guessing. I don't wana put it in only to have to drop it once i put the cab n dog house on. It did make a nice indention in my dirt lean-to lol.
Posted via Mobile Device

burnin oil 06-17-2013 08:52 AM

Re: SM465 Cover Help
 
To get the cover off take all the bolts out of the cover to trans. Engauge 1/2 way into reverse and it should come right off.

79Betty 06-17-2013 09:21 AM

Re: SM465 Cover Help
 
I can't get the cover off cuz the shifter is "stuck" it feels like in neutral. It won't take gear. Not low or reverse.
Posted via Mobile Device

79Betty 06-17-2013 05:39 PM

Re: SM465 Cover Help
 
I think i got it. I lined the 3 bar slots in the top cover and it come right off. Put the gasket on and all is good so far...
Posted via Mobile Device

crazy longhorn 06-17-2013 08:36 PM

Re: SM465 Cover Help
 
Quote:

Originally Posted by 79Betty (Post 6127328)
The case is fine, so's the input shaft. But now it won't free shift... Which is what started the 2nd guessing. I don't wana put it in only to have to drop it once i put the cab n dog house on. It did make a nice indention in my dirt lean-to lol.
Posted via Mobile Device

Just be thankful that you were not under that pig, when it came down...YIKES! Longhorn


All times are GMT -4. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com