The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - DJM lower control arm help. (https://67-72chevytrucks.com/vboard/showthread.php?t=586920)

Claytona08

06-30-2013 10:12 PM

DJM lower control arm help.

2 Attachment(s)

Hey guys I need some advice. I installed these lower control arms last week or so and when I put the top of the coil spring in the bucket where it's suppose to sit then it didn't sit in the keeper on the lower control arm. Should I just grind off the keeper?
Posted via Mobile Device
Posted via Mobile Device

INSIDIOUS '86

07-01-2013 12:01 AM

Re: DJM lower control arm help.

You still have the receipt for those?
Posted via Mobile Device

lowridergmc

07-01-2013 12:11 AM

Re: DJM lower control arm help.

i installed the same kit 4 months ago.just lined up bottom and as long as the upper is centered you are good to go

Claytona08

07-01-2013 02:01 AM

Re: DJM lower control arm help.

Quote:

Originally Posted by INSIDIOUS '86 (Post 6150898)

You still have the receipt for those?
Posted via Mobile Device

Yep I still have the receipt.
Posted via Mobile Device

Claytona08

07-01-2013 02:02 AM

Re: DJM lower control arm help.

Quote:

Originally Posted by lowridergmc (Post 6150913)

i installed the same kit 4 months ago.just lined up bottom and as long as the upper is centered you are good to go

That is what may do. Did you take measurements prior to installing the kit?
Posted via Mobile Device

All times are GMT -4. The time now is 01:15 AM.