The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Step Notch (https://67-72chevytrucks.com/vboard/showthread.php?t=587889)

Ziegelsteinfaust

07-08-2013 09:51 PM

Step Notch

I need a step notch for my 1966 F100 project so I can get the truck down to the proper height. My frame rails are flat or straight depending on how you want to look at it.

Who is a good supplier of these things? I found ones online for $100-$150, but from suppliers I don't know.

Or should I make my own out of 2x4 3/16th walled material.

SCOTI

07-09-2013 07:57 AM

Re: Step Notch

Check this site out. They have a step notch that would work well for you & is a little bit of DIY as well...

http://www.welderseries.com/blog/

andrewmp6

07-10-2013 01:57 AM

Re: Step Notch

Or maybe something like this http://www.avsontheweb.com/product.p...cat=482&page=1 or http://www.avsontheweb.com/product.p...cat=482&page=1

wraprail

07-10-2013 01:57 PM

Re: Step Notch

Welder Series stuff is top notch. I have used their step notch and it is DLUX.
Posted via Mobile Device

Ziegelsteinfaust

07-10-2013 04:34 PM

Re: Step Notch

Thanks guys.

I am likeing the 8 piece kit since I can adjust the notch to my needs

vegadesign

07-10-2013 04:38 PM

Re: Step Notch

make your own, thats like less than $30 in materials

All times are GMT -4. The time now is 03:28 PM.