68 C20 LWB parting out
 

hi, I am parting out a 68 C20 LWB, does not have a bed.
I have almost everything else to it.

Here are a few pics.
Let me know if your interested in pics of anything.


thanks,
John

Re: 68 C20 LWB parting out
 

what kind of mirrors does it have?

Re: 68 C20 LWB parting out
 

Attachment 1131144

Attachment 1131145

Attachment 1131146more

Re: 68 C20 LWB parting out
 

What do you want for the front fenders and doors?

Re: 68 C20 LWB parting out
 

I'm interested in the front grille section and hoops. PM sent.

Re: 68 C20 LWB parting out
 

PM sent!

thanks

Re: 68 C20 LWB parting out
 

PM replied!

thanks,

Re: 68 C20 LWB parting out
 

It would be a good idea to read the stickys at the top of each forum providing board rules. 1. Must list prices. 2. No PM sales.

Re: 68 C20 LWB parting out
 

I will post the prices with the pictures upon request

I replied to the PM as a courtesy. no prices were mentioned

Re: 68 C20 LWB parting out
 

I'd take $250

Re: 68 C20 LWB parting out
 

What do you want for the clutch fan assembly?
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

Did it have a TH400 tranny in it? If so do you have the kickdowwn harness for it?
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

I'd have to look.
Ill get back to you this evening

Re: 68 C20 LWB parting out
 

Ok - I'm interested in the grille panel and hoops. Is this acceptable to the board?

Re: 68 C20 LWB parting out
 

$50?

Re: 68 C20 LWB parting out
 

This is the grill that came off of it.
Much different then the one I have for my 67
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

Well, it's a real nice looking specimen - unfortunately, it appears to be a 69-70 model. I'm gonna hafta pass on this - thank you for the consideration, though!!!

Re: 68 C20 LWB parting out
 

How much for the deluxe running lights? close up pics? I need a set.

Re: 68 C20 LWB parting out
 

Going to cut up the frame and cab unless anyone wants to make an offer.

Re: 68 C20 LWB parting out
 

Did you see if you had the TH400 harness? I couldn't do 50 on the fan but maybe the fan and harness together.

Thanks.
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

Just got home, heading out to look.
Where would it be located?
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

Grill was sold today to a local cl buyer
Posted via Mobile Device

Re: 68 C20 LWB parting out
 

what shape is the cab in? rust issues? bondo?

Re: 68 C20 LWB parting out
 

If you don't know what transmission came in the truck, I would first look in the cab at the gas pedal assembly and see if there is a switch mounted to the pedal bracket. It is a long plunger style switch that is activated when the gas pedal is stomped on. If you have that then there should be a wire going to it and also the fuse box and a wire running down to the tranny.

Re: 68 C20 LWB parting out
 

I could use a cross member out of that frame if you are cutting the frame up. It is the furthest rear cross member that is riveted into place.

Let me know if you would be interested in cutting this out, maybe cut the frame right in front and right in back of it unless you have a blue wrench to get the rivets out without hurting the cross member.