The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Clutch Linkage Big Spring Question (https://67-72chevytrucks.com/vboard/showthread.php?t=589617)

mi396ss

07-22-2013 06:39 AM

Clutch Linkage Big Spring Question

I ordered some clutch linkage parts from LMC truck since there were some parts missing on the truck I bought. I think I have everything together except I have a question on the big spring. Is this supposed to go from the clutch fork to the frame/z-bar bracket? The spring has a hook on one end and is just straight with no hook on the other end. Am I supposed to make my own hook on the other end? Thanks for the help.

chiefcfd

07-22-2013 07:17 AM

Re: Clutch Linkage Big Spring Question

Yes you can make your own bend. Look at post #14 in this thread for a pic. Hope this helps you.

http://67-72chevytrucks.com/vboard/s...d.php?t=542388

'68OrangeSunshine

07-22-2013 07:08 PM

Re: Clutch Linkage Big Spring Question

I have found a convenient hole in the frame [inboard face] to hook into.

mi396ss

07-23-2013 07:37 AM

Re: Clutch Linkage Big Spring Question

Ok, thanks guys.

All times are GMT -4. The time now is 12:53 AM.