The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)
-   -   1967-68 & 1969-72 GMC radiator supports now in stock (https://67-72chevytrucks.com/vboard/showthread.php?t=589942)

GMCPaul 07-24-2013 02:33 PM

1967-68 & 1969-72 GMC radiator supports now in stock
 
FINALLY, We now have the 1967-68 GMC radiator supports & the 1969-72 GMC radiator supports in stock available to be shipped. You'll find both on the following page of our web site
http://www.gmcpauls.com/Body&Bumpers.htm
Paul @ GMCPauls

SuperC10Tex 07-24-2013 04:02 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by GMCPaul (Post 6188151)
FINALLY, We now have the 1967-68 GMC radiator supports & the 1969-72 GMC radiator supports in stock available to be shipped. You'll find both on the following page of our web site
http://www.gmcpauls.com/Body&Bumpers.htm
Paul @ GMCPauls

I have a 70' GMC, your "1969-72 GMC radiator supports" is a perfect match to a "T"? Can you give any discounts or a break on the shipping? Any feedback would be deeply appreciated.

GMCPaul 07-24-2013 04:12 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by SuperC10Tex (Post 6188259)
I have a 70' GMC, your "1969-72 GMC radiator supports" is a perfect match to a "T"? Can you give any discounts or a break on the shipping? Any feedback would be deeply appreciated.

Yes they do fit just like the originals. In regards to shipping can't help on that as they ship a box that is the maximum size allowed to ship oversized II which is 130 dimensional inches so UPS & Fed-Ex treat them as though they weigh 70lbs when they bill on the shipping. If the box had been 1 inch larger they would have been truck freight or UPS & Fed-Ex Oversized III where they bill you $70-$75+cost based upon weight.
Paul @ GMCPauls

SuperC10Tex 07-25-2013 06:36 AM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by GMCPaul (Post 6188151)
FINALLY, We now have the 1967-68 GMC radiator supports & the 1969-72 GMC radiator supports in stock available to be shipped. You'll find both on the following page of our web site
http://www.gmcpauls.com/Body&Bumpers.htm
Paul @ GMCPauls

Three last questions before I place my order, I thought 67-72 GMC supports were the same? Is your #132056 - "Radiator Support Cushion Mounting Kit 1/2Ton 2 Wheel Drive 1/2ton", the proper kit for my 70' GMC? Anything else you can think of needed for install? Thanks!

GMCPaul 07-25-2013 07:42 AM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
67-68 core supports have 6 holes across the front bottom of them for the splash shield. 69-72 core supports do not. Other than this difference the 2 are the same. That is the correct part # for your radiator support kit.
In regards to anything else a extra set of hands for the install is helpful.;)
Paul @ GMCPauls

SuperC10Tex 07-25-2013 10:16 AM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by GMCPaul (Post 6189224)
67-68 core supports have 6 holes across the front bottom of them for the splash shield. 69-72 core supports do not. Other than this difference the 2 are the same. That is the correct part # for your radiator support kit.
In regards to anything else a extra set of hands for the install is helpful.;)
Paul @ GMCPauls

What shipping method should I select for shipping the new 69-72 Radiator support and a Radiator kit (Total =$252.00 + $40.80)? I want it to come to my home by UPS or FedEx ground (not freight), I am seeing "Select Shipping Based on Total - $40.80"?

nlped 08-04-2013 03:40 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by SuperC10Tex (Post 6189399)
What shipping method should I select for shipping the new 69-72 Radiator support and a Radiator kit (Total =$252.00 + $40.80)? I want it to come to my home by UPS or FedEx ground (not freight), I am seeing "Select Shipping Based on Total - $40.80"?

I have the exact same question...? I am ordering this core support & I need to know if $40.80 is going to be the actual shipping...

Nevermind...I went ahead and ordered it, I sure hope this is the correct amount of shipping :D

SuperC10Tex 08-04-2013 10:19 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by nlped (Post 6204447)
I have the exact same question...? I am ordering this core support & I need to know if $40.80 is going to be the actual shipping...

Nevermind...I went ahead and ordered it, I sure hope this is the correct amount of shipping :D

nlped, yes that is the price, don't forget new radiator support rubber and bolts!! already have my new one installed, only one modifacation so fare.

OLD:
http://i232.photobucket.com/albums/e...ps96736a97.png

NEW GMCPauls: ;)
http://i232.photobucket.com/albums/e...ps295b0162.png

nlped 08-05-2013 06:36 AM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Thanks man, that definitely looks much better!!! :metal:
Posted via Mobile Device

valnzula 09-11-2013 04:54 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Question
is the radiator support straight on top or does it have a bow or curve towards motor?
thanks

GMCPaul 09-11-2013 10:43 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by valnzula (Post 6264458)
Question
is the radiator support straight on top or does it have a bow or curve towards motor?
thanks

Straight.
Paul @ GMCPauls

valnzula 09-11-2013 11:27 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
4 Attachment(s)
Attachment 1151070

Attachment 1151072

Attachment 1151073

Attachment 1151075

GMCPaul 09-12-2013 05:18 PM

Re: 1967-68 & 1969-72 GMC radiator supports now in stock
 
Quote:

Originally Posted by valnzula (Post 6265124)

Your truck has obviously been in a front end accident at one time as the bow you have illustrated in the pics with your straight edge should not be there.
Paul @ GMCPauls


All times are GMT -4. The time now is 01:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com