1970 dana 44 for parts
 

I have a 70 4x4 dana 44 front axle asmp it is complete i will be parting it out it is a drum brake housing

Re: 1970 dana 44 for parts
 

If the front hubs are the original blue Spicers I'm interested in them, entire assembly

Re: 1970 dana 44 for parts
 

hey is it a 6 lug I need good clean spindles.

Re: 1970 dana 44 for parts
 

Please put me in line for the spindles
Posted via Mobile Device

Re: 1970 dana 44 for parts
 

I have the spindels off i am going to degreese them friday to see how they look the original lock out hubs are the original style i am in the process of restoring them they will be for sale when done

Re: 1970 dana 44 for parts
 

Are they 6 lug and do they include brake backing plate and drum
Posted via Mobile Device

Re: 1970 dana 44 for parts
 

I am first in line for the spindles if they are 6 lug drum spindles I want them.

Re: 1970 dana 44 for parts
 

I do have the backing plates and drums and bearing hubs

Re: 1970 dana 44 for parts
 

also interested in axles depending on length and condition

Re: 1970 dana 44 for parts
 

any news on the spindles yet?

Re: 1970 dana 44 for parts
 

any news on the parts yet?

Re: 1970 dana 44 for parts
 

Here are the pictures of the parts.

Re: 1970 dana 44 for parts
 

uh idk if those pics are for me but those are the knuckles. I need the spindles. the tube thing that bolts to the knuckle that the bearings ride on.

Re: 1970 dana 44 for parts
 

sorry wrong picture here you go also the axles are in real nice shape joints are free no striped splines

Re: 1970 dana 44 for parts
 

ok how much are the spindles. and what's the length of the axles from u joint center to the end of all 4 sections.

Re: 1970 dana 44 for parts
 

the axles came out of the same drum brake housing it is dated 1970 that is what it came out of do you still need measurements on the spindels $60.00 for the pair plus shiping

Re: 1970 dana 44 for parts
 

yes I need measurements for both inner shafts and both outer shafts. late 69 and some of 70 came with a shorter dana 44 and I am having a little bit of an issue finding the ones I need. the shaft measurements are

17-1/2 & 35-1/8 30 spline - that's from the center of the u joint to the end of the shaft on the inner shafts

9-7/8 19 spline outer shaft

Approx. diameter 1-1/4

all measurements are give or take a 16th of an inch.

and I need to make sure that were the seals ride that there aren't grooves that will cause a leak.

this is were I started in the first place.

Re: 1970 dana 44 for parts
 

and yes I am interested in both the spindles and axles as long as the axles are the right ones.

Re: 1970 dana 44 for parts
 

my axles are 1 1/4 od 19 & 30 spline short shafts 9 7/8 inner shafts 18 3/8 and 36' the axle housing was cast 2/70 built 1 st week of march

Re: 1970 dana 44 for parts
 

Ok axles are the more common longer ones. I seem to have a half year only axle from 69. So stupid. well how much for shipping on the spindles to 11520.??????
Posted via Mobile Device

Re: 1970 dana 44 for parts
 

Shiping $16.80

Re: 1970 dana 44 for parts
 

would you do 67 shipped on the spindles??

Re: 1970 dana 44 for parts
 

Spindels are sold still most other parts i have a few parts pending

Re: 1970 dana 44 for parts
 

did you receive the payment for the spindles?

Re: 1970 dana 44 for parts
 

yes, they will be going out Tuesday fed x