The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   need to find a paint shop in so cal (https://67-72chevytrucks.com/vboard/showthread.php?t=590922)

70blackfish 08-01-2013 11:07 AM

need to find a paint shop in so cal
 
need to find a paint shop in so cal that won't charge 4k plus......

im in ventura co. but van nuys canoga park is ok.

SS Tim 08-01-2013 12:02 PM

Re: need to find a paint shop in so cal
 
Saticoy Autobody http://www.saticoyautobody.com/

leddzepp 08-01-2013 12:55 PM

Re: need to find a paint shop in so cal
 
The cost will vary depending on the condition of the truck, single stage or base/clear, etc.
Posted via Mobile Device

Steeveedee 08-01-2013 10:24 PM

Re: need to find a paint shop in so cal
 
Quote:

Originally Posted by 70blackfish (Post 6199728)
need to find a paint shop in so cal that won't charge 4k plus......

im in ventura co. but van nuys canoga park is ok.

Stay away from Earl Scheib, in Canoga Park. My son went against my advice and had his '70 Dart done there. We had blocked out the whole car dead smooth, but when he got it back (I didn't notice it at first, since he had gone away with it to college for several months), there were dings in the paint all over the edges. The only way that the dings would be there with the new paint and clear coat would be if it was done before the new paint was sprayed. Never again.

...and, as leddzepp says, it will depend on condition and what you want. I've spent over a year on my '68 Buick Skylark, and am still not satisfied with the condition to paint it. If I had that amount of work done at a body shop, it would have totaled the car.

70blackfish 08-02-2013 02:03 AM

Re: need to find a paint shop in so cal
 
single stage is fine...I can do a lot of the prep work... dismantling, fenders cab,
doors and sanding. i want it painted in pieces...


All times are GMT -4. The time now is 04:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com