The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AL 1970 bare cab / driver fender/ cowl (https://67-72chevytrucks.com/vboard/showthread.php?t=591094)

496bb 08-02-2013 05:48 PM

1970 bare cab / driver fender/ cowl
 
bare cab, has VIN plate still attached. no title, just bill of sale. has been blasted at some point but not primed, so it has some surface rust. i think it will clean up fine though. cab corners are good and rockers have a few small holes but not eaten completely through. small bit of rust where floor meets kick panel. uncut dash, firewall good. has mounting nubs for divider trim and headliner. sold my project so somebody needs to come get this! $150 pickup only

GOING TO THE SCRAP YARD NEXT WEEK IF NOBODY WANTS IT

http://i1139.photobucket.com/albums/...ps82e963e7.jpg
http://i1139.photobucket.com/albums/...ps89d6b1b5.jpg
http://i1139.photobucket.com/albums/...ps0cb5f61a.jpg
http://i1139.photobucket.com/albums/...psc9702e32.jpg
http://i1139.photobucket.com/albums/...psbd68650e.jpg
http://i1139.photobucket.com/albums/...ps9863b673.jpg

CST drivers fender, good shape. $50 pickup only
http://i1139.photobucket.com/albums/...ps5abb7635.jpg

good cowl piece with mesh debris shield. $30 pickup only

496bb 08-02-2013 06:06 PM

Re: 1970 bare cab / driver fender/ cowl
 
http://i1139.photobucket.com/albums/...psf2faf63f.jpg

496bb 08-04-2013 03:03 PM

Re: 1970 bare cab / driver fender/ cowl
 
Bump

nlped 08-04-2013 04:29 PM

Re: 1970 bare cab / driver fender/ cowl
 
How's the roof & windshield areas? Rust, dents etc? Hard to tell in the pics, but is that a dent on the roof?
Posted via Mobile Device

nlped 08-04-2013 04:35 PM

Re: 1970 bare cab / driver fender/ cowl
 
And to prevent being sniped. I'm gonna take it if the roof isn't dented and I lay eyes on it. PM sent. :metal:
Posted via Mobile Device

496bb 08-04-2013 07:57 PM

Re: 1970 bare cab / driver fender/ cowl
 
Roof not dented. No rot around windshield or drip rails. Rust is surface as seen in photos
Posted via Mobile Device

nlped 08-04-2013 08:42 PM

Re: 1970 bare cab / driver fender/ cowl
 
When can I come see it?
Posted via Mobile Device

special-K 08-06-2013 09:45 AM

Re: 1970 bare cab / driver fender/ cowl
 
How soon does it have to be picked up?

nlped 08-06-2013 10:34 AM

Re: 1970 bare cab / driver fender/ cowl
 
I'm going to pick it up tomorrow :)
Posted via Mobile Device

nlped 08-10-2013 03:02 PM

Re: 1970 bare cab / driver fender/ cowl
 
Nice doing business with you Chad. I got the cab unloaded & in the garage just before it started raining! I'm tired of this rain!

Don't forget to shoot me that contact info for the blaster.

Thanks again!
Posted via Mobile Device

STOCKISH 08-10-2013 03:50 PM

Re: 1970 bare cab / driver fender/ cowl
 
Nice buy!!

496bb 08-10-2013 07:18 PM

Re: 1970 bare cab / driver fender/ cowl
 
Cab and cowl SOLD. Fender still available.

Same here Ed! Nice to meet ya.

PM on the way. I think I corrected that other issue we discussed, if you would let me know. Thanks again.

nlped 08-11-2013 09:08 AM

Re: 1970 bare cab / driver fender/ cowl
 
It's fixed! And th me for the contact info. :metal:
Posted via Mobile Device


All times are GMT -4. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com