The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Measurement needed (https://67-72chevytrucks.com/vboard/showthread.php?t=591410)

Steve Cole

08-05-2013 10:41 AM

Measurement needed

1 Attachment(s)

Hey guys,

Can somebody tell me how high the stock bench seat is from the cab floor? I'm talking about to the top (highest point) of the lower seat cushion. I am installing different seats and want to compare seat heights. Also, tell me HOW you measured so I can duplicate it. Thanks!

Attachment 1138160

med.bronze

08-05-2013 01:07 PM

Re: Measurement needed

I took a straight board and placed it on the highest point of the cushion (which is about 3-4 in from the front edge) and measured down to the top of the door sill plate and came up with 15 3/4 in
Posted via Mobile Device

All times are GMT -4. The time now is 12:33 PM.