The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO Tons of misc parts (https://67-72chevytrucks.com/vboard/showthread.php?t=592707)

WETOWM 08-14-2013 06:37 PM

Tons of misc parts
 
I have finished my project i have and ton of misc parts nuts and bolts fenders shifters boots brackets seats frames drive shafts to much to list it all let me know what you may need and i can see if i have it most parts $5.00 on up plus shiping

jimer1964 08-14-2013 06:40 PM

Re: Tons of misc parts
 
hi, looking for a pass.side 4x4 exhast manifold? long shot!

WETOWM 08-14-2013 06:53 PM

Re: Tons of misc parts
 
I had a few 4x4 parts most gone no good on the manifold

chewysask 08-14-2013 07:18 PM

Re: Tons of misc parts
 
Need 4-threaded door inserts that are used to attach the armrests to the door.

WETOWM 08-14-2013 08:45 PM

Re: Tons of misc parts
 
Sorry all my dorrs are gone already

RetiredUSAF 08-14-2013 09:23 PM

Re: Tons of misc parts
 
Auto cross member

WETOWM 08-14-2013 09:53 PM

Re: Tons of misc parts
 
I have 1 for a 2wd

RetiredUSAF 08-14-2013 10:03 PM

Re: Tons of misc parts
 
Do you have a gas pedal and hardware for a 71-71. How much shipped for x member and pedal if you have one?

WETOWM 08-14-2013 10:06 PM

Re: Tons of misc parts
 
Dont have a gas pedal what part of missouri are you in ?

RetiredUSAF 08-14-2013 10:41 PM

Re: Tons of misc parts
 
Lake of the Ozarks. Laurie, Mo. How much for trans x member shipped?

WETOWM 08-14-2013 10:57 PM

Re: Tons of misc parts
 
$45.00 on complete cross member and all the bolt would rather not ship we get down that way every now and then

Sammy 08-14-2013 11:16 PM

Re: Tons of misc parts
 
Any decent 67/68 Grill BowTie's?

olblue60@aol.com 08-16-2013 04:42 PM

Re: Tons of misc parts
 
tach

WETOWM 08-16-2013 07:10 PM

Re: Tons of misc parts
 
No good on the 67-68 grill bow tie - the tachs i had are gone

ZEKE68 08-16-2013 08:50 PM

Re: Tons of misc parts
 
Do you have any one piece SWB drive shafts? If you do let me know the lenght center to center of the u joints. I may be interested in one.

WETOWM 08-16-2013 10:07 PM

Re: Tons of misc parts
 
Not doing to good here !!! None of the trucks i parts where short beds

happy68 08-16-2013 10:21 PM

Re: Tons of misc parts
 
Do you have a chrome front bumper for a 68?

WETOWM 08-18-2013 11:34 AM

Re: Tons of misc parts
 
The only bumper i have left is a chrome 71 front

Hard_Rain420 08-18-2013 11:53 AM

Re: Tons of misc parts
 
Looking for a real clean 69-70 hood bow tie shipped to 32906

Matt Cramer 08-22-2013 06:20 PM

Re: Tons of misc parts
 
Got a set of small block engine stands?

WETOWM 08-22-2013 07:28 PM

Re: Tons of misc parts
 
I do $28.00 shiped

green72s 08-22-2013 07:46 PM

Re: Tons of misc parts
 
How about a nice grill bowtie for a 72 shipped to 85284? Any AC parts for a 72?

WETOWM 08-22-2013 08:25 PM

Re: Tons of misc parts
 
Dont have a good grill bow tie . I do have some a/c parts what are you looking for ?

green72s 08-22-2013 08:55 PM

Re: Tons of misc parts
 
The gray box under the hood (evaporator housing?)
The evaporator core
Three brackets (the rear pivot bracket, front brace, and the shim) - SBC
The bolts for those compressor brackets
The condenser hard lines in good and usable condition
The suction and discharge hoses in good and usable condition
The expansion valve (with tube sensor) in good and usable condition

Matt Cramer 08-23-2013 08:12 AM

Re: Tons of misc parts
 
Do you have a picture? Just wanted to make sure they get more clearance than the ones I've got now.


All times are GMT -4. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com