Help with step up and/or grab bar on 55.5
 

I probably should have done this before I painted my truck, but the paint shop had an opening before I was 100% ready, and I jumped on it.
My truck is high, and can be difficult for some to get in (impossible for others). Has anyone installed grab bars and or step ups on their 55-59? I'd like to have something on the inside of the cab to assist ingress and egress if possible. Step loops or nerf bars would also be of interest.
It's on a 77 frame, so nerf bars from a 77 might work, or be able to be modified to work.
I'm concerned about the step up loops, as they appear to mount to the body, and I don't want to mess it up.
Anyone have any experience with any of these?

Re: Help with step up and/or grab bar on 55.5
 

really? can you drive another car under it?

:wop:

Re: Help with step up and/or grab bar on 55.5
 

I got Dee Zee nurf/step bars for a 77 SWB GMC I'm building now. They were listed as a fit for my truck, but are apparently a universal. The mounting brackets don't really work as shipped on the rear mount due to the step up in the frame. Also, if you had and kept dual saddle tanks, they sit right where you want to put the rear step mounting bracket. Just something to be aware of... BTW, I love your truck!

Re: Help with step up and/or grab bar on 55.5
 

Didn't want to be an "attention whore" and post pictures again...
But - since you *asked* - :)

Re: Help with step up and/or grab bar on 55.5
 

Thanks for the input. That's what I was concerned about. Frame is powdercoated, so I don't want to drill any holes unless I have to. I don't have side tanks on it. I have one between the frame rails under the bed.
Thanks for the compliment on the truck! I'm getting to know and love it more myself! Only has about 1500 miles on it since the ground up build.