porterbuilt arms, billet specialties tru trac
 

Standard width porterbuilt arms complete with hardware for 67-72 $1000


Billet specialties tru trac for SBC. complete kit with water pump, power steering, ac compressor, and alternator. All polished except the edelbrock water pump. Installed but not used. Part number 13220 $1500

Prices include shipping

Re: porterbuilt arms, billet specialties tru trac
 

Tru trac sold locally. Arms still available
Posted via Mobile Device

Re: porterbuilt arms, billet specialties tru trac
 

Arms sold pending payment
Posted via Mobile Device

Re: porterbuilt arms, billet specialties tru trac
 

Just curious. These arms can be used with both springs or bags correct? Also what's the purpose for narrow and standard with. Sorry for the thread highjacking:waah:
Posted via Mobile Device

Re: porterbuilt arms, billet specialties tru trac
 

Arms are available. Deal fell thru. They are setup for bags but could be with springs. The narrow advantage is more fender clearance if needed
Posted via Mobile Device

Re: porterbuilt arms, billet specialties tru trac
 

Ttt new arm price 900 shipped

Re: porterbuilt arms, billet specialties tru trac
 

$900.00 is a steal.

Re: porterbuilt arms, billet specialties tru trac
 

63-70 or 71/2 ball joints? Are you willing to do 900 shipped?

Re: porterbuilt arms, billet specialties tru trac
 

I cant say for shure which set of ball joints. Been a while since i ordered. If there is an easy way to check for the difference i can do so. It is 900 shipped.

Re: porterbuilt arms, billet specialties tru trac
 

Just call Porterbuilt if that's where you ordered them from, they can pull up your order and tell you which ones you have.

Re: porterbuilt arms, billet specialties tru trac
 

Honestly I'm not sure what makes the difference. I know spindles are ordered the same way. Not sure if they are interchangeable or not. I have my buckets sold pending payment so in that case I would have the money. I'll look into the differences on the ball joints

Re: porterbuilt arms, billet specialties tru trac
 

Ever figure out what style ball joints these are? Are they for stock crossmember or dropmember?

Re: porterbuilt arms, billet specialties tru trac
 

These will fit on the dropmember and factory crossmember, you'll just need the porterbuilt lower crossshafts for the factory crossmember which looks like he has those in the picture.

Re: porterbuilt arms, billet specialties tru trac
 

If the arms are around on Wed, I will take them, that's when I will be able to pay you.

Re: porterbuilt arms, billet specialties tru trac
 

Ok sounds good

Re: porterbuilt arms, billet specialties tru trac
 

Is there a way to set these up for coilovers? I emailed porterbuilt the other day, but haven't heard back from them yet.

Re: porterbuilt arms, billet specialties tru trac
 

Here is the number for Porterbuilt ask for Dave Porter (480) 297-2621 or call
Pro Performance. Ask for Travis (480) 420-8175 he sells the Porterbuilt suspension and is very knowledgable about any question you have about your build plans.

Re: porterbuilt arms, billet specialties tru trac
 

thanks for the help, I will do that.

Re: porterbuilt arms, billet specialties tru trac
 

[QUOTE=67ctener;6320255]Ever figure out what style ball joints these are?

Re: porterbuilt arms, billet specialties tru trac
 

I did not find any specs on them. If anyone knows the difference i can check them

Re: porterbuilt arms, billet specialties tru trac
 

The ball joints can be for whatever year spindle you run i thought? I have a 72 spindle set up right now, so I bought 72 ball joints...

Re: porterbuilt arms, billet specialties tru trac
 

Check the ball joints, they might have part numbers on them. Then post the part numbers here on the forum.

Re: porterbuilt arms, billet specialties tru trac
 

You have a set up for 63-70 or 71-72

Re: porterbuilt arms, billet specialties tru trac
 

As far as I know the lower BJ from 71+ is all the same. The upper changes from 67-70, 71-72 and 73-87, I think. Lolife had a post on here where he laid it all out.

Re: porterbuilt arms, billet specialties tru trac
 

Checked with porterbuilt. They are 71-72 ball joints