Converting to Disc! I've got a few questions?
 

Conversion:

I've got a 71 front end control arms with ball joints, disc, etc. Questions is: What year can I go with for the master cylinder, booster?? O'reilly says possibly 71 also? Any tips??
(I've got a 69 C10)

About to start rocking the Torq Thrust 20's!!
Being custom built as I type!
Front: 275x45x20 on a 8 wheel with a 4.5 offset!
Rear: 295x45z20 on a 10 wheel with a 6.25 offset!

Pics coming soon

Thanks for your time!

Re: Converting to Disc! I've got a few questions?
 

You can use a master cylinder and booster from a disc brake truck 71/72 truck. You could also use 73-87. Get the disc/drum proportioning valve also.
Posted via Mobile Device

Re: Converting to Disc! I've got a few questions?
 

Re: Converting to Disc! I've got a few questions?
 

Wow!! You gentlemen rock! You guys so covered information I for sure needed!!

Thanks again!! Wow!