The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - C10 EMBLEM question (https://67-72chevytrucks.com/vboard/showthread.php?t=594021)

1966burb

08-24-2013 02:30 PM

C10 EMBLEM question

Can the C10 emblems on the side of the front fenders be changed without pulling the fenders?

Larry64

08-25-2013 01:42 PM

Re: C10 EMBLEM question

On my 64 they can.
Larry

AcampoDave

08-25-2013 08:12 PM

Re: C10 EMBLEM question

Try removing the bolt at the bottom corner fender pocket (if it's not too badly rusted) then you may create enough flexibility to access the emblem nuts. If you get the bolt out, put some anti-sieze on it when you put it back in. It sucks to re-drill and tap when they snap off. Been there, done that.

1966burb

08-26-2013 04:37 PM

Re: C10 EMBLEM question

I will try to pull the bottom fender out. Thanks for the tips. j

All times are GMT -4. The time now is 08:23 AM.