The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - KS 60-66 Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=594929)

I am listing a bunch of parts for my brother, Dylan, who has become diagnosed with an illness that has made it unable for him to work on vehicles much anymore. I will post pictures later, but as of right now, there are a set of doors from a 65 C60 for sale, very straight. Automatic column, and pedal assembly, possibly a whole 63 C20 with a 283 and factory power steering. He has a whole array of hoods for sale most in very good condition. Most of these items will need to be picked up, since they are big items, unless shipping is arranged by the buyer. There will be smaller things that will be up for sale as well. I plan on going out to get pictures of them later on today. All prices are OBO. Please post then PM. Thanks

Factory NOS Clock with paperwork and hardware-$600 OBO

Auto Column-165.00 or $200 with pedals.

Deluxe glovebox door with Chevrolet insert-40.00

63-66 Hoods-$125-175 Some with almost zero damage, some with more.

64-66 C60 doors been inside for years, just moved out to pasture with cab-$500

One passenger side door from 66 C10 with trim pieces has small rust holes on bottom.-$140 obo

Again, I will post Pictures as soon as I can. Kind of new to how this site works so bare with me.

Is that red knob on the dash just left of the gauge cluster an emergency flasher?
Posted via Mobile Device

Do you have a set of moldings?

Yes it is a flasher, and which mouldings?

Are the C-60 doors the same as the C-10?

hundo the doors should be the same unless the c60 had set back axle/short hood

hundo the doors should be the same unless the c60 had set back axle/short hood then the lower front corner would be cut on about a 45 degree angle

Well, lets hope, I need a set of super nice doors that are close to me.

They are a standard c60 set if doors. Not the stub nosed style
Posted via Mobile Device

Will the doors work on a standard c-10? Pics?

Yes they will. Im going out right now to take pictures of them. They are still on the cab which I believe has been decided to be sold. You can buy the doors or the whole cab. Anyones choice. But ill get some pictures up. Thanks

Ok, just let me know......

Here are some pictures of the hood and doors from the C60.

Price on doors? I would pick them up of course....

Quote:

Originally Posted by 60ShortStepGMC (Post 6250864)

Sent a PM.

Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer were available (ones near the adjusting bolt head).

78f1hundo-prices for the doors are posted. PM me with an offer if you have one.

60ShortStepGMC-Im trying to put a pocture to what you are needing for sure..

Any pics of the drivers door?

Driver side door was caught by the wind at one point, but not heavily dented. The top body line got it worst, and its not very deep, and on the bottom mark, its hardly even dented

Ok, I will think about it, can't do the 500

Open to offers
Posted via Mobile Device

Hi , would you take 300.00 cash for the door's , the one's pictured on the cab. I would pick them up , as i live in great bend.Let me know so we can get rolling on this sent pm .

Quote:

Originally Posted by dtkarst (Post 6251004)

60ShortStepGMC-Im trying to put a pocture to what you are needing for sure..

Sorry, not able to get a photo posted at this time. I'll work on it.