dashpad question!
 

i have a 1982 c10 stepside i been looking for a decent dashpad and i found one for a 1980 Chevrolet K5 Blazer in decent shape and for $30

i want to know if it will fit my truck??

Re: dashpad question!
 

It should fit but I also know some parts are different from 73-80 to 81-87
Posted via Mobile Device

Re: dashpad question!
 

looks like the same as my 79
so both bezels will work
can't see L/R speaker holes?

Re: dashpad question!
 

I know that you can use 81 up in the 80 down as long as you use the 81 up gauge bezel with it. Wouldn't see why the opposite wouldn't work.
Posted via Mobile Device

Re: dashpad question!
 

The VIN is in a different location for 73-74, 75-80 and 81-87 I believe.
Posted via Mobile Device

Re: dashpad question!
 

I'm using a 89 in my 78, the vin hole is empty, cause it's in the jamb,below the catch
my 79 is on the dash as is the 88 of course.(i believe 79 on Vin is up)
the 78/79 pad with the later bezel leaves a funny gap at the top(can't find pic i took)
but it's because the pad starts closer to the bezel no over hang,seen here in old shots of the 78

Re: dashpad question!
 

i will buy it and see if it fits

Re: dashpad question!
 

And when/if you do let us kno with plenty of pics
Posted via Mobile Device

Re: dashpad question!
 

should be on the drivers lock pillar for 73-78, then 79-87 has it on the dash...
Posted via Mobile Device

Re: dashpad question!
 

i got lucky! it turns out its for a silverado!
like new condition!
for $30 thats a great deal!

Re: dashpad question!
 

here more pics

Re: dashpad question!
 

The 81-87 dash pads will work in older trucks but the older 73-80 dash pads will not cover the gauge bezel of the 81-87 trucks. The bezels are thicker on 81 and up trucks and will stick out past the pad. I would call the guy you bought it from and see if he has the gauge bezel from the truck it came from. it wwould probably look good in your truck looking at the shape of the pad and trim. That's a nice pad you bought. If you end up not using it I would be interested in buying it but I bet you could sell it for a good profit locally without having to bother with shipping.
Frank
Posted via Mobile Device

Re: dashpad question!
 

thanks!

i will have to see if it fits correctly

Re: dashpad question!
 

looks mint
Posted via Mobile Device