trans stuck to engine?
 

Hello

Trying to pull my th400 from my 350. Everything is removed. I double, triple, and quadruple checked! Tried wiggling it left and right, up and down. It doesn't even move a mm to get a pry bar in between. Any tips or tricks??

Re: trans stuck to engine?
 

Loosen the crossmember and/or remove trans mount and wiggle the back of the tranny.DOH! wiggle the back of the 400

Re: trans stuck to engine?
 

crossmember is removed, and tried wiggling in all directions. Still hasn't moved at all.

Re: trans stuck to engine?
 

What about carefully jacking up on the back of the tranny to help break it loose?

Re: trans stuck to engine?
 

Tried that also. I've removed many transmission over the years and never had one that wouldn't come out. Been trying for 7 hours now.

Re: trans stuck to engine?
 

Try taking the Torque converter bolts off. My old tranny jammed itself into the torque converter and I had to do this. Is your starter off, I know dum question but that might be gumming things up too.
Posted via Mobile Device

Re: trans stuck to engine?
 

Starter and Torque converter bolts are removed.

Re: trans stuck to engine?
 

How about heating it, Good or Bad?

Re: trans stuck to engine?
 

Trying to reuse the 400?

Re: trans stuck to engine?
 

what about prying down at the back? 2x4 on cab floor and then pry down?

Re: trans stuck to engine?
 

No not trying to reuse it, but would like to sell it after wards. And haven't tried that one yet. I'll go give it a shot.

Re: trans stuck to engine?
 

It worked, Thanks a million!!!

Re: trans stuck to engine?
 

Walkerb,
Where were you 7 hours ago?
LOL!:devil:

Re: trans stuck to engine?
 

I'm glad it worked man. Now sell me some rust free NC body parts! Hahahahaha