The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   A/C expansion valve ? (https://67-72chevytrucks.com/vboard/showthread.php?t=596387)

chevydog66 09-11-2013 09:23 PM

A/C expansion valve ?
 
What's the difference between the "replacement style" and the "original w/ straight solid sensor"? I think I need to replace my A/C expansion valve and don't know which one to purchase.

BruthaMan 09-12-2013 12:35 AM

Re: A/C expansion valve ?
 
The difference is basically weight (the original is a little heavier) and the length of the coil with temp sensor on the end.

The reproductions have much more wire coil to them, so you have to wrap them a few more times around the evaporator tube. Other than that, they function the same and there is no surprises when installing one.

You will want to pick up some sticky tar (get it off Ebay pretty cheap) to cover/hold the coil/temp in place. It's really a straight forward swap out and direct fit.

AC Delco part number: 155488

Four Seasons part number: 38652

Both available on rockauto.com for our trucks.

On Ebay, do a search for: tacky tape

http://www.ebay.com/itm/Tacky-Tape-A...8e3a3c&vxp=mtr
(I just purchased this exact one from same vendor about two weeks ago)

Hope that helps.

chevydog66 09-12-2013 08:20 AM

Re: A/C expansion valve ?
 
Will I have to split the evap core case in order to install it?
Posted via Mobile Device

mrein3 09-12-2013 09:09 AM

Re: A/C expansion valve ?
 
Quote:

Originally Posted by chevydog66 (Post 6265418)
Will I have to split the evap core case in order to install it?
Posted via Mobile Device

No. It sticks on the plumbing outside the case.
I should say you stick it on there. You need that sticky tar stuff to hold it to the AC pipe coming out of the evap.

chevydog66 09-12-2013 02:28 PM

Re: A/C expansion valve ?
 
So I should buy the replacement style?
Posted via Mobile Device

425HP409 09-14-2013 01:01 AM

Re: A/C expansion valve ?
 
There are two styles of AC expansion valve bulbs, one type has a coil at the end like Napa #207307, and one that has a long fat type bulb like Napa #207300. I have found that the large bulb type works best. The installation of the bulb is critical, it must be attached to the evaporator outlet pipe securely. You must clean the outlet pipe down to bare metal, clamp the bulb to the outlet pipe with hose clamps, then wrap securely with AC tape, making sure that no outside air can get to the bulb.
Posted via Mobile Device

chevydog66 09-14-2013 10:27 PM

Re: A/C expansion valve ?
 
Thanks for your help guys.


All times are GMT -4. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com