The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   where to find u-bolts for the lower control arms? (https://67-72chevytrucks.com/vboard/showthread.php?t=596838)

king-918 09-15-2013 03:32 PM

where to find u-bolts for the lower control arms?
 
86 swb 2wd
Posted via Mobile Device

lolife99 09-15-2013 04:07 PM

Re: where to find u-bolts for the lower control arms?
 
Classic Parts of America has them.
I got my last set from my GM dealer.
Posted via Mobile Device

INSIDIOUS '86 09-15-2013 04:42 PM

Re: where to find u-bolts for the lower control arms?
 
http://www.classicparts.com/mobile/1.../#.UjYbpGS9Kc0

Here it is
Posted via Mobile Device

chevy-fun 09-15-2013 06:06 PM

Re: where to find u-bolts for the lower control arms?
 
do these need to be replaced? i soaked mine an brushed them clean today. an how tight should they be tightned down to.

cory d 09-15-2013 06:18 PM

Re: where to find u-bolts for the lower control arms?
 
the threads like to get galled on the outsides, they seam to open up

INSIDIOUS '86 09-15-2013 06:27 PM

Re: where to find u-bolts for the lower control arms?
 
I've taken mine off a few times. Just threw them in a vice and tightened them down to get them to go back in. Torque specs can prob be found via search. I tightened mine down to about eeerrghh ftlbs :lol: if the threads are fine then you should be good to go otherwise they are cheap and cheap reassurance at that
Posted via Mobile Device

tinydb84 09-15-2013 06:28 PM

Re: where to find u-bolts for the lower control arms?
 
I got mine at NAPA

cory d 09-15-2013 06:28 PM

Re: where to find u-bolts for the lower control arms?
 
i think it was like 80 or more, i didnt grab the torque wrench. just cranked them down

chevy-fun 09-15-2013 06:34 PM

Re: where to find u-bolts for the lower control arms?
 
ya there good. they came out with no problems. an none the threads got missed up. just cleaned them up an painted them black. just waiting for it to cool down a bit, to go back out there an reinstall. an ill make sure to tighten it down to EEERRGHH ftlbs lol. thanx again

KQQL IT 09-15-2013 06:40 PM

Re: where to find u-bolts for the lower control arms?
 
1/2 impact gun.

With no engine.
But grrrr tight works
Posted via Mobile Device

INSIDIOUS '86 09-15-2013 07:20 PM

Re: where to find u-bolts for the lower control arms?
 
Quote:

Originally Posted by KQQL IT (Post 6270620)
1/2 impact gun.

With no engine.
But grrrr tight works
Posted via Mobile Device

I prefer eeerrghh ftlbs lol but don't do ffffffeeeeeeuuuuhh. That's to much
Posted via Inflatable pizza and a fancy lawn mower

king-918 09-15-2013 07:30 PM

Re: where to find u-bolts for the lower control arms?
 
Quote:

Originally Posted by INSIDIOUS '86 (Post 6270592)
I've taken mine off a few times. Just threw them in a vice and tightened them down to get them to go back in. Torque specs can prob be found via search. I tightened mine down to about eeerrghh ftlbs :lol: if the threads are fine then you should be good to go otherwise they are cheap and cheap reassurance at that
Posted via Mobile Device

I've lost or thrown mine away. Also need upper x shafts never enDing
Posted via Mobile Device

INSIDIOUS '86 09-15-2013 07:56 PM

Re: where to find u-bolts for the lower control arms?
 
Classic parts should have the cross shafts as well and the studs. Just about everything for the front suspension which is nice.
Posted via Mobile Device

AnotherC10 09-16-2013 02:49 PM

Re: where to find u-bolts for the lower control arms?
 
Your local Napa should have them.


All times are GMT -4. The time now is 10:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com