The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Introducing "Gangreen" (https://67-72chevytrucks.com/vboard/showthread.php?t=596914)

Gangreen79 09-15-2013 11:29 PM

Introducing "Gangreen"
 
Hello all, this is my second post here. I have been viewing the forums the last few days and I decided to post. I picked up my 79 K20 Scottsdale last Saturday after I got off work. I went all the way to Freeport,IL from Sheffield and traded my 83 C10 I had for it. While it is not the prettiest thing in the world, it is one of my dream trucks.

As mentioned above it is a 1979 K20 Scottsdale with a 400 small block, turbo 350, and a 203 or a 205 t-case (not sure which haven't looked real close yet). It has the full floater 14 bolt rear but I haven't looked at the front yet. 4x4 works as it should. Full time of course lol.

It has some issues that need fixed. Speedo doesn't work, drivers side window also doesn't work (currently removed waiting for new mechanism), rust (not unusual fora IL/WI border truck, and I have discovered that the vacuum modulator needs replaced because its using trans fluid and blows white smoke in passing gear.

Now for some pics. These are from the Craigslist ad for it.
http://i1346.photobucket.com/albums/...ps43460bd2.jpg

http://i1346.photobucket.com/albums/...psfd6584b2.jpg

http://i1346.photobucket.com/albums/...ps594bc94f.jpg

http://i1346.photobucket.com/albums/...ps8a0f1b58.jpg

That's as it was when I got it. More pics in next post.
Posted via Mobile Device
Posted via Mobile Device

Gangreen79 09-15-2013 11:46 PM

Re: Introducing "Gangreen"
 
I took these two pics when I looked at it. I believe it is somewhat rare for being a 79 fleet side 3/4 ton with a wood floor in the box.

http://i1346.photobucket.com/albums/...ps528462ef.jpg

http://i1346.photobucket.com/albums/...ps6e0ea73c.jpg

Then Sunday I put my light bar in (just ratchet strapped for now) and headed over to my buddy's to pull the stock wheels and new Courser 9.50-16.5s off and stick on his old 35x12.5x16.5 off road tires (don't remember their name right now) on 16.5x10 wagon wheels. I only had to do minor trimming to the passenger side front fender to fit them.

http://i1346.photobucket.com/albums/...ps5b2530ee.jpg

http://i1346.photobucket.com/albums/...psdace83f7.jpg

http://i1346.photobucket.com/albums/...psd46b3047.jpg

http://i1346.photobucket.com/albums/...ps1e2c948f.jpg

More pics tomorrow. Let me know what you think. And I'll start a project post soon.
Posted via Mobile Device
Posted via Mobile Device

07XCSBZ71 09-15-2013 11:51 PM

Re: Introducing "Gangreen"
 
Looks like a cool project, but I liked it better with the stock wheels and no roll bar. I also like the green.

Tx79chevy 09-16-2013 12:17 AM

Re: Introducing "Gangreen"
 
How solid is the front of the truck? The back looks like it has some pretty bad rust problems.
Posted via Mobile Device

hopped up 09-16-2013 12:21 AM

Re: Introducing "Gangreen"
 
i like the truck! lets see what the truck you traded for looked like
Posted via Mobile Device

Gangreen79 09-16-2013 12:24 AM

Re: Introducing "Gangreen"
 
The radiator support, bumper, valence, and hood are solid. Fenders are shot, cab is solid except for corners and drivers floor under e brake. Doors are solid. Bed is toast, but I found a rust free one for $500.
Posted via Mobile Device

Gangreen79 09-16-2013 12:26 AM

Re: Introducing "Gangreen"
 
I'll post pics of the 83 I traded tomorrow.
Posted via Mobile Device

Zane M 09-16-2013 12:53 AM

Re: Introducing "Gangreen"
 
203 T case. You have the full time 4X4 vs part time with lock out hubs.

willett 09-16-2013 12:56 AM

Re: Introducing "Gangreen"
 
Sweet sh*t kicker!!
Posted via Mobile Device

Zane M 09-16-2013 12:56 AM

Re: Introducing "Gangreen"
 
Common rust issues for a truck of that age in any area that gets snow/salted roads.

BigBlocksRule 09-16-2013 06:49 AM

Re: Introducing "Gangreen"
 
Just looking at the pics makes me want to run to my doc for a tetanus shot!

Good luck, will be following the build.

Gangreen79 09-16-2013 12:50 PM

Re: Introducing "Gangreen"
 
Here's pics of my 83 C10 I traded. The drivers side floor was gone.

http://i1346.photobucket.com/albums/...psa942822f.jpg

http://i1346.photobucket.com/albums/...ps5287c8d7.jpg

http://i1346.photobucket.com/albums/...ps5b2d888c.jpg

http://i1346.photobucket.com/albums/...psd66dfe4d.jpg
Posted via Mobile Device

Katrina/10 09-17-2013 05:05 PM

Re: Introducing "Gangreen"
 
I never saw a 79 wide with wood bed.

jpnh 09-18-2013 01:44 AM

Re: Introducing "Gangreen"
 
Did the factory offer a wood floor fleetside bed??? looks stock by the way its mounted never seen one before-jeff

Katrina/10 09-18-2013 09:19 AM

Re: Introducing "Gangreen"
 
The guy in Kuwait has one too, but his truck is a 73.

79Betty 09-18-2013 09:20 AM

Re: Introducing "Gangreen"
 
Think it was optioned up to 80 in wood fleet?
Posted via Mobile Device


All times are GMT -4. The time now is 04:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com