factory 4x4 drivetrain: Will '59 work in '60-66?
 

I just lucked into a '59 factory 4x4 front axle with locking hubs, cross member, trans, transfer case, transfer case cross member, rear axle and factory front wheels, for scrap price.
A local rod shop I know is converting a 4x4 to 2x4 for a customer, and they were going to haul it all off... it's already in the back of the truck ready to go to the scrapper, and I happened by there today!

I've always wanted a factory 4x4. Mainly concerned about axle width, spring-pad mounting location, and whether it's the "right" T-case and trans for the later trucks.

My preference is the '60-'63 trucks (wrap-around windshields--yes, I'm aware of the frame differences with '63), but this will be worth building a house around a door knob--I'll look for a '55-'59 if these parts won't fit the '60-'63.

Anyone have the low-down on 'em?

-Brad

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

WTF?!?!? Some people... :crazy:

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

that would be a Napco setup if it was original in the 59. frames are different. you would be better off going to to the 73 - 87 stuff. the you would be able to have better brakes and steering and much more avail. doners are not that expensive
x frames are not that convenient to put transfer cases in
ron
that setup would be good for the 55-59 guys. if someone wanted the optional stuff. would be a shame to see it go to the scrapper.

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

Agreed about the x frame advice. That said, I installed a Spicer 24 out of a '57 Napco into my 77crew cab dually when I converted it to 4x4. On the '57 Napco that I had, one of the kingpins sheared off and I replaced the axle with one from an '87 3/4 ton Silverado. Sometimes it takes some modification but there is a lot of interchangeability. I do agree with the previous comments that the Napco guys would really like that stuff. Hell you could probably sell the drive train for enough money to get into an original 60-66 4x4 and save the hassle of the conversion too. My .02¢
Posted via Mobile Device
Posted via Mobile Device

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

http://roanoke.craigslist.org/pts/4081861037.htmlHere's one if it's not too far away would be a good deal for someone...

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

Re: factory 4x4 drivetrain: Will '59 work in '60-66?
 

CL> roanoke> all for sale / wanted> auto parts - by owner
Reply g7b4h-4081861037@sale.craigslist.org [?]

flag [?] : miscategorized prohibited spam best of
Posted: 2013-09-21, 12:19PM EDT

1962 Chevy 4X4 Chassis - $800 (Vinton)



image 1image 2image 3image 4image 5image 6
Original Chevy K10 chassis for sale. Long bed frame, 3 speed transmission, Dana 44 front differential, Chevy transfer case and rear differential. Truck was last running 3 years ago. I do not know the gearing set up or operating condition of any of the components. Asking $800 or REASONABLE offer. Accept cash or cash. Sold as one unit, you part out if you don't need everything. Thanks for looking. NO TITLE. •Location: Vinton
•it's NOT ok to contact this poster with services or other commercial interests


Posting ID: 4081861037

Posted: 2013-09-21, 12:19PM EDT

Updated: 2013-09-25, 10:17PM EDT

email to a friend

Avoid scams, deal locally! Do NOT wire funds (Western Union, Moneygram).
Beware cashier checks, money orders, shipping, non-local buyers/sellers. More info
FORMAT:
mobile
regular
© 2013 craigslist
help
terms
privacy
safety
feedback
about
cl jobs

Re: factory 4x4 drivetrain: Will '59 work in '60-66?