? Bout tires and wheels....
 

Ok here's the deal guys....
I got a '86 long bed that I did a 4.5"/6" drop on and I am wanting to run 15x10 rims all round with 295/50-15 all round....
So my question is "will I have any clearance issues with them rubbing or contacting the fenders?"
I don't have the back spacing measurements on the rims yet....
Ordering them from LMC Trucks.....
Please somebody lemme know on this issue....


:metal: :chevy:
:metal: :gmc2:
Posted via Mobile Device

Re: ? Bout tires and wheels....
 

With 5" backspace you should be okay for the rear... Dunno bout the fronts...
Posted via Mobile Device

Re: ? Bout tires and wheels....
 

Ya I figured rear would be fine....
Was mainly worried bout front more than rear....
Was told the combo was gonna be too wide, but just wanted to see if I could find out for sure before I buy my tire and wheel combo....
Posted via Mobile Device

Re: ? Bout tires and wheels....
 

That combo isn't going to work on the front with that much drop, you need more like a 15x8, 4in bs, and a 245/60/15 tire.

Re: ? Bout tires and wheels....
 

ok this is the rims i wanna go with on the truck...
http://i42.tinypic.com/2mw9tz4.jpg


but i cant find them in 15x8.... only in 15x10
i know they make them in 15x8 cause i have seen them before on here on other trucks...

so iif anybody knows where i can find them please let me know PLEASE!!!!
any help on this would be greatly appreciated....
Posted via Mobile Device

Re: ? Bout tires and wheels....
 

LMC doesn't stock a large variety of wheels and sizes, try Jegs or Summit.


http://www.jegs.com/c/Wheel_Street-W...03205/10002/-1

http://www.summitracing.com/search/d...t/wheels-tires

Re: ? Bout tires and wheels....
 

Agreed! This is the same setup I am going to put on my short bed.

Re: ? Bout tires and wheels....
 

And they will probably be cheaper if they have them.

Re: ? Bout tires and wheels....
 

Ok I found these exact rims on jegs.com in the 15x8 and 15x10, but the only backspacing they got is 3.75".... (Both sizes)
So with this backspacing would they rub or contact the fenders at all?
If I have to I can run the 15x8 all round instead of 15x10....

:metal: :chevy:
:metal: :gmc2:
Posted via Mobile Device