The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   new leafs installed w/ pics (https://67-72chevytrucks.com/vboard/showthread.php?t=599593)

Pano 10-07-2013 08:40 PM

new leafs installed w/ pics
 
Truck is an 87 GMC V2500. Tires are 235/85/16's in both pics.

The front had 2 leaf and the rear had 8 leaf rated at 2450 lbs. I replaced the front with 3 leafs rated for 1400 lbs and rears with HD 8 leafs rated at 2600 lbs from General Spring.

I have never driven in an old truck with soft springs so I cannot compare the ride but I use it to tow and haul and don't care so much about the ride.

I don't know if it sits higher than stock since my stock springs were worn but I like how it sits now.

Stand by for pics.

Pano 10-07-2013 08:48 PM

Re: new leafs installed w/ pics
 
Having issues uploading pics

Pano 10-07-2013 08:53 PM

Re: new leafs installed w/ pics
 
I have uploaded from my pc before but it won't seem to work now. (shrug)

Pano 10-07-2013 08:55 PM

Re: new leafs installed w/ pics
 
1 Attachment(s)
This is from around 2002 after paint.

Pano 10-07-2013 08:57 PM

Re: new leafs installed w/ pics
 
1 Attachment(s)
This is from today with the new springs (same tires)

Chevy3+3 10-07-2013 11:51 PM

Re: new leafs installed w/ pics
 
Slick truck you have there. Very clean looking. Looks like you may have gained an inch in height. I wish General Spring made some lift spring packs because they have a nice HD 4 leaf thick front spring for my 1 ton. That should hold up to the 454. I just want a set of springs to bump me up about 2 1/2" and wont break down from the weight of the big block

Pano 10-08-2013 05:56 AM

Re: new leafs installed w/ pics
 
Thanks...I bought the truck in 97 and had it painted around 2001/2. At the time a buddy of mine worked at one of the GM factories and I scored a bunch of O&M parts. ( doors, front bumper, tailgate, grill, fender wells, trim, etc.) If I had known which parts would become scarce I would have picked up some other stuff.

Anyway my truck has the 350. Maybe you can go with the 4 leaf and a zero rate 1 inch block to hopefully Get 2-2.5 inches.

Ski-me 10-08-2013 01:04 PM

Re: new leafs installed w/ pics
 
Looks nice. I like the new wheels better too!

crashz 10-08-2013 04:36 PM

Re: new leafs installed w/ pics
 
Sweet truck Pano! Hope to see you cruising around MA someday!


All times are GMT -4. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com