The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - AZ '66 Long Bed Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=600086)

66 Burban

10-12-2013 12:54 AM

'66 Long Bed Parts

5 Attachment(s)

LOCATION: TUCSON, AZ Local pick up preferred but will ship on your dime.

BBW Cab Section w/Glass: $250 -- will cut to your needs or take the whole cab.

Long bed frame & front cross member -- sandblasted & powder coated satin black -- all new grade 8 hardware: $400 SOLD

Grill support: $100 ----- Radiator support $100 ----- Tail gate (no rust): $200

Four speed column: $100 ----- Dash: SOLD ---- Brake & clutch pedal set: $75

Hood: SOLD ----- Fenders: SOLD ----- Bed: SOLD ----- Doors: SOLD

Fender extensions: $20/each ----- Rear end: SOLD

More pics and parts later

cru_zn_29

10-12-2013 11:16 AM

Re: '66 Long Bed Parts

I am interested in BBW is the glass original soft ray tinted. also Does the BBW metal have holes or dents ?
Thanks Kenny

66 Burban

10-12-2013 11:36 AM

Re: '66 Long Bed Parts

I'm 90% sure back glass is Soft Ray ---- all side glasses were --- I'll check tomorrow and let you know --- you're 1st on this.
Couple small dents in metal below window.
Thx for looking...

Quote:

Originally Posted by cru_zn_29 (Post 6311078)

I am interested in BBW is the glass original soft ray tinted. also Does the BBW metal have holes or dents ?
Thanks Kenny

Greg63

10-12-2013 11:43 AM

Re: '66 Long Bed Parts

I'm looking for an uncut low hump transmission floor panel.
Do you have one?
Greg.

66 Burban

10-12-2013 11:50 AM

Re: '66 Long Bed Parts

Quote:

Originally Posted by Greg63 (Post 6311101)

I'm looking for an uncut low hump transmission floor panel.
Do you have one?
Greg.

I have the hump cover from this truck --- think it is high hump -- not sure.
It has one small cut at front --- not cutout just looks like a saw cut --- very
easy to weld...
What is height of high and low hump??

Greg63

10-12-2013 11:55 AM

Re: '66 Long Bed Parts

High hump is the same height from the seat to the firewall. Low hump dips down about 2" at the seat.
Greg.

cru_zn_29

10-12-2013 11:55 AM

Re: '66 Long Bed Parts

Ok ! Also check for scratches or sand damage.
Thanks Kenny

66 Burban

10-13-2013 12:44 AM

Re: '66 Long Bed Parts

Quote:

Originally Posted by Greg63 (Post 6311109)

High hump is the same height from the seat to the firewall. Low hump dips down about 2" at the seat.
Greg.

OK --- mine is high hump............

66 Burban

10-13-2013 12:46 AM

Re: '66 Long Bed Parts

Quote:

Originally Posted by cru_zn_29 (Post 6311110)

Ok ! Also check for scratches or sand damage.
Thanks Kenny

Kenny,

Checked the back glass late this PM ----- it is light green tinted replacement --- not Soft Ray.... evidently cut some time ago. I kept Soft Ray door glass and vent windows for spares for my suburb.

cru_zn_29

10-13-2013 10:37 AM

Re: '66 Long Bed Parts

Thanks for checking I need a Soft Ray
Kenny

c10dude805

10-16-2013 02:19 PM

Re: '66 Long Bed Parts

I remember a while back you were heading out to the Pomona swapmeet for pickup, is this still an option?

c10dude805

10-16-2013 06:38 PM

Re: '66 Long Bed Parts

Sorry, forgot to mention, i'm interested in the cab as a whole.

yote1234

10-16-2013 07:02 PM

Re: '66 Long Bed Parts

is the tailgate have a bow? looks like bowed at middle bottom? thx

66 Burban

03-10-2014 04:07 PM

Re: '66 Long Bed Parts

TTT --- parts still for sale !!!

All times are GMT -4. The time now is 10:03 PM.