The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Rear window.. (https://67-72chevytrucks.com/vboard/showthread.php?t=600220)

Tuff 1986

10-13-2013 03:41 AM

Rear window..

My back window (glass) and rubber seal need to be replaced.. Anyone know where I can order the better made seal.. And should I get the glass from online or a local car window place.. My truck is a 1986 chevy c10 stepper..

kSStamp0182

10-13-2013 04:16 AM

Re: Rear window..

Quote:

Originally Posted by Tuff 1986 (Post 6312150)

http://www.onepieceproducts.com/Prod...=7387C10FLUSHB

this is what i ordered for my 82. doing this to mine when i get time.

old Rusty C10

10-13-2013 08:42 AM

Re: Rear window..

about a year ago I ordered the one from LMC and installed the glass on the front windshield ( during my ground up resto) the right side of the gasket came apart after a year or so mostly inside the garage right at the lower corner split between the center and the chrome strip.. I had the glass shop procure one and had them install the new one the back window one I got from LMC has been fine so far and I installed the rear slider from LMC

Sodell

10-13-2013 10:41 AM

Re: Rear window..

I just replaced my slider with flat glass. I found a clean one on e-bay for $25. You can find the glass pretty easily.

Tuff 1986

10-13-2013 03:43 PM

Re: Rear window..

Thanks guys for the ideas... My mission this week is to get that done..

All times are GMT -4. The time now is 06:42 AM.