The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The pre 1947 Chevrolet & GMC Truck Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=202)

- - Bed Assembly Question (https://67-72chevytrucks.com/vboard/showthread.php?t=601296)

Bo Duke

10-21-2013 10:19 PM

Bed Assembly Question

How many cross sills are used to assemble a 1939 short box bed? 2 or 3? I know there should be one towards the front, and one in the middle. Is there a 3rd some where, not counting the rear cross sill under the tailgate?

I've got a basket case 1939 Chevy 1/2 ton short bed truck. I need to order the parts to put the bed back together. All I have are the sides, front panel, and a rusty rear cross sill.

Thanks!

gale	10-23-2013 07:53 PM

Re: Bed Assembly Question

I don't have a truck older than '54 but the LMC catalogs show the holes in the bed layout. The catalog should be on line. Mar-K in Oklahoma sells wood and metal bed parts so they may have the count in their online catalog.

Bo Duke

10-23-2013 09:14 PM

Re: Bed Assembly Question

Thanks. I plan to order the stuff from Mar-K, I just haven't had a chance to call them. Hopefully in the next couple days

old yelr

10-23-2013 10:18 PM

Re: Bed Assembly Question

There are three cross sills.

Woogeroo

01-20-2014 01:07 PM

Re: Bed Assembly Question

You could ask the Mar-Ktech.

Mar-k also sells bed assembly instructions.

-W

1Bad 37

01-20-2014 09:16 PM

Re: Bed Assembly Question

Quote:

Originally Posted by Woogeroo (Post 6481283)

You could ask the Mar-Ktech.

Mar-k also sells bed assembly instructions.

-W

Mar k has nice parts! :up:

All times are GMT -4. The time now is 03:18 PM.